hook

I have looked through all the threads and have not seen one like mine.Any help hooking up the throttle would be awesome.Thanks.

Am I missing something? I can't figure out how to get this hooked up properly. Am I missing an extra spring? Perhaps a small bracket to hold the metal fitting at the end of the casing on the throttle cable. This is on a Tecumseh 3.5 hp motor on a Manco Thunderbird. Thanks, I'm 4 days old at...

I want to add a functioning headlight and taillight to my mini bike. I want the headlight to be on some type of switch so I can turn it on or off and I want the taillight to activate when I hit the brakes. How do I hook these up and what should be the power source? I was considering getting...

OK so I searched my A$$ off looking for this style hook up and I know Ive seen it. I recently installed a new engine in my mini and dont know how to hook the throttle up. I have a throttle linkage set up for it that I bought and just need to know the finishing touches. Im sure once the veterans...

its just a normal 3.5 hp engine. can u show me some pics on how to hook it up? here is the engine im planning to connect it to,

I have hooked up a battery to my mini. I am running a taillight, brake light, headlight and a cigarette lighter outlet. I wanted to charge the battery with the 3A coil that I have on my 6.5 clone (with the gov. removed.) The battery is rated for a 8A 1 hour charge and a .5A 6 hour charge...

I have a 8hp briggs with the governer removed,I am trying to come up with a good way to connect the throttle directly to the carb.Have any of you found a easy way to do it.I have a design for a part to connect the cable ,but before I put the time into building it I thought that there might be a...

k so i put my 6.5 clone on my bike and i need help on how to hook up the cable to stock throttle arm or if i can get one for cheap online

i got this 11hp engine and the battery hookup is confusing the engine book doesnt tell me how to. i was also wondering if its ok to take the top box of the spark arrestor off on the newer 11hp clones..the box is bolted onto the pipe and i still have the pipe on..will it give me anymore HP??

HI, im building my very first gokart and have a Tecumseh 5.0 Hp power sport engine (I think the model number is OH195XE). Seeing it is my very first kart I have no clue how to hook up the throttle cable. If anyone can give me some directions or post some photos of how to hook it up, it be...

Since this has been asked before,,, I Thought I'd post this for those with a big Tecumseh that comes with the thumb controls and want a mini throttle at almost zero cost. This type is also doesn't stress the throttle body like hooking springs and cable directly "could." (if you have a 3.5-5HP...

Briggs Throttle Hook Up

Briggs throttle hook up

Throttle Cable Barrel End

Could someone tell me which parts I would need to hook up a kickstand to this bracket? Thankyou [/IMG]

I am having trouble figuring out how or if I can attach my throttle cable to this linkage..the previous owner had one connected somehow but it was disconnected when I got the bike..I notice when I lift the lever to the open position it doesnt move the linkage to the fast position all the way..Im...

How and what do you use to hook up a throttle to the popular engine being sold at haror freight, is there a kit thta makes it easy? I want to put this motor on a basic mini bike kit

How do you get the throttle to hook up on the harbor freight motor for the doddle bug, I was looking at both in the store and i'm not sure of an easy route? If I could do it I might buy both things

Does anyone have a pics of the briggs stock carb over the top throttle hooked up?? This is the link below,I can't figure out after the cable hooks up to the L bracket.or is it because the hook up is for a racing carb,not stock?? ebay briggs throttle hoop upItem number: 400019698874 thanx...

Hey fellas, just saw someone else posted about an old briggs throttle hook up question. I have some pics, and a similiar question. not sure how all the different rods and bell cranks work. see the link to pics. Does this all tie into a governor? I see where the throtle cable attaches...