magneto

Looking for a complete magneto, coil, condensor, Tech part # 30550. I don't have the engine PN or SN (no shroud) but its a period correct Tec H50 on a 69 Rupp Goat. Any help, pics, parts would be great. thank you very much.

I have 2 mini bikes I picked up at a swap meet a few weeks ago. One a warrior, and one a heat. I picked up 2 of the HF 6.5 Pred engines, my question is, the heat bike has a working magneto, with the wires for the light, can I put that one on the new HF motor? Thanks.

Hello all! I am looking for a magneto off of a 5hp Briggs engine. I beleive my Briggs is from the 70's. I would rather get it from here rather from my local Tru Value who wants $45 new and $25 used. Let me know guys and thanks. Jay

I have a Manco go kart that has lights that I'm guessing are run by a magneto on the engine. They are very dim but do get slightly brighter when going faster. Would it be possible to put a battery in-line so that the magneto could charge the battery like an alternator, and the battery would...

well i have this generator powered by a hs50 tecumseh nd first i checked for spark no spark spark plug was good so i checked the points the points were shot i bought a new condenser/points i set the point to .020 apart i got the timing right on nd i try 2 to start it nd no spark not even a...

An updated photo with labels for wiring the magneto. If this is incorrect I will update it.

Looking for advise on a troubleshooting my HS40 which I have just rebuilt. I have just finished installing new oil seals & connecting rod, valves & springs, Stens 520-902 carb & intake manifold, but have had a recurring problem with spark. Before the overhaul I had put in new points/condenser/...

is there a way to bypass the governor on a old 3hp magneto the governor some how is connected to the magneto it wont start unless the governor is connected its like a linkage that connects to the magneto on this little plate thats connected to the magneto it wont start unless it connect on there...

When you replace a flywheel you don't have to replace the magneto correct? I got a lighted flywheel from one of the members here and i think maybe it doesn't work??? it worked fine with the older one, put the new one on and it wont make a spark. motor is a tech ohh50, suggestions?

i just took my 3hp apart and found that the condensor came loose and got crushed, :censure:the wires are pretty bad too, (bare wires) so i was thinking about replacing the whole thing (magneto). i have 3 of them but all are kind of shabby looking. or should i just replace the condensor and dont...

I'm looking for a flywheel (magneto) for a old Tecumseh H25-25173G? Of course me and my son rebuilt the carburetor, cleaned out gas tank, new chain and new gas line and filter. It would not crank and felt like it need points and condensor. Tried the knocker, to get flywheel off, and it moved a...