mikuni

Morning people,just recived my mikuni 22mm kit for my clone 6.5 and setting up the carb I noticed the needle on the slide has the metal clip and a little white plastic washer on it,does it need the washer on it as I don't think it should? Any advice thanks from the uk lee

I have a 1975 Suzuki 2 stroke dirt bike that has a Mikuni carb on it. I am having problems with the carb to throttle linkage. When the twist grip throttle is put together properly the carb is 2/3 open and won't close. :doah: At first I thought the throttle cable was too short, but it is the...

Well guys I have a mildly built 6.5hp clone (billet rod,flywheel, 4 degree timing, intake, exhaust, ect.) with a stock carb and a #90 jet. I'm thinking about putting a #92 in it though since I have one. But my question is, I have an old Honda ATC 90 three wheeler thats junk but it's got a...

Please only good condition parts. If you have a clone im still interested but would prefer that you have ran it and can vouch for it. Very interested in additional jets also.

asking $20 shipped. located in so cal.

Got a clone 390 with a stock carb and a Mikuni fuel pump attached. Runs good with out the pump. Carb runs fuel out the shut off valve and around the float bowl with the pump attached. Too much fuel pressure. How do I reduce pressure output on this pump?? Its not the float adjustment. Tank is...

I have for sale a Genuine 26mm Mikuni carb kit. It includes the carb, a short style manifold used on a GX-200 clone, an air cleaner, and a couple of extra jets. I decided to go to a Flat Slide carb so this one has to go. Here's your chance to own a 26mm carb kit for less than the price of a 22...

Well I just finished building my new honda clone. I added and aluminum flywheel, , billet rod, 265m cam and a 22mm mikuni. I finally got around to bolting it up to my doodlebug, and tried to start it, after a little bit of playing with it i was able to have it run, and man was it fast. When I...

I just got a new Mikuni VM22 for my Briggs Flattie. It is the real VM, not the copies on Ebay. I am running an 03-SS cam and was wondering if any of you are running a Mikuni VM22, and what size jets you are using and needle clip position. I am just trying to find a starting point to tune this...

Need one that has a special bend in it. Get with me for details if you're up to making a NICE intake for me.:thumbsup:

Want to buy a 24mm mikuni flat slide

They say the flatslides provide cosiderable performance gains vs the roundslides. What is the difference in performance between the 26mm roundslide and the 24mm flatslide? is it worth the extra dough?

What size mikuni would i use on a 8hp briggs?

First of all, I would like to say that I feel not far from retarded for asking this question. :doah: :out: I have a Mikuni carb on my 2001 Yamaha YFM25XP quad, I am not sure the size or type but I have pictures below. I put a K&N air intake and breather on it but it is not getting enough fuel...

So I finally broke down and bought what I really hope is a "real" mikuni, a VM22-133. Mikuni - CARB-22MM MIKUNI FLANGE MOUNT VM22-133 I was hoping that I would be able to reuse my old jets from my crappy clone mikuni but they are different and this new carb has me pretty confused as to...

i need a 22 mikuni, or a gasket for one that is PERFECT SPOT ON. this carb doesnt haft to work or be complete, i need to so i can get flanges perfect spot on.

I got a whole tube of, what i think, are jets for a mikuni. They came with a blockzilla i bought, even though i didnt get the carb they were used with. :out: I've been holding onto these incase I ever get a mikuni, but Im starting to liquidate all my unused parts, and these get to go. I have no...

Does anyone know where I can get a new float bowl gasket for 22 Mikuni carb? Thanks

I got a flatslide Mikuni, and got it attached to my bike. Where can I get jets for it? And where do I measure to get the MM? It's a true VM series. And if anyone can help, it idles too high but when you give it gas it dies immediatly. Any jet recommendations...

Hey all, I am looking for a 28 or 30 mm mikuni round slide for a big block tecumseh project I am putting together. Thanks guys