moto

Just noticed that Motovox has some of the highly desired front suspension forks listed on their website that will work with the Motovox and Monster Moto mini bikes. Motovox as a brand is closing its doors and this will be the last batch listed on their website. I got a set for myself on my 212...

Hi, I have a Monster Moto MMB80 and a HF 212 predator engine. I have modified the air box, removed the front oil drain plug to place a set screw in the hole to allow more clearance. I believe that I have the engine in the correct place, I have check the alignment of the chain and everything...

Anybody know the size of the belt for the clutch? Its a moto-skeeter 450. thanks

picking this up on Wednesday.

Like the title says, looking for a nice condition Speedway Moto Cross tire. Size is 3.50 X 10. Tire must be in good shape with no cracks. Used is okay, NOS is preferred. Anybody have one they want to part with? Thanks, Mike

Just bought this engine. 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine EPA I took the OG gas tank off so i can put on my old moto skeeter gas tank on my new engine and to my suprise there are 2 fuel lines WTF.I dont have a lot of knowledge of engines, so am wondering what is the second...

It's close to me if someone want's it Moto Skeeter Canadian Mini Bike Japan 2 Stroke Motor Rupp Speedway | eBay

Looking for any parts for a 71 moto beta bebe. Any seat or carb would be great. I have paypal.

http://www.kijiji.ca/v-view-image.html?adId=1044747565&image=0&enableSearchNavigationFlag=true

I bought a monster moto mmb80 camo at sears on sale ($100 off coupon). Went to HF and bought a 212cc hemi predator engine (with another coupon). Installed on to monster moto, I had to do the following for all this to work. Installed 11 tooth 3/4" clutch. Installed ARC Big Bertha Clutch and...

Hi i have a problem with my moto skeeter 450 IGNITION COIL, it *****ed. www.mbw.com/pdf/manuals/divConstr/EC10D.pdf Parts that i would need page. 6 fig. 6 , part 2 and 3: 106-70110-08 Generating Assembly 106-70247-08 T.C.I. Unit Seems there is no way i can get these so i...

Pretty much a survivor except the Torque Converter cover that I can tell. Runs good but has been sitting some. Seat has a few tears. $750, OBO.

Does anybody know a source for this type of rubber washer? It's meant for a steel washer to sit inside of the recessed area. The steel washer is about the size of a quarter. I'm trying to finish my Moto Skeeter, and I can't seem to find these anywhere.

So I'm thinking about making a motovlog like 6foot4honda or bakerxderick. Should I go for it? Nobody's making a minibike motovlog

1984 Yamaha tri moto runs and rides great , head light and tail light work , shifts smooth , tires have good tread and hold air , comes with a spare set of rear tires , plastic and seat in very good shape, needs new brake pads and choke cable , but starts fine without it , looking for 300 cash...

I'm new here, so I hope I have placed this in the right category. I always wanted one of these as a kid-many years later I finally own a 450. It runs great, but as you can see there are a few parts missing, and the recoil housing is welded on by a previous owner. I know original parts are (just...

picked up a really nice parilla engine mounted on a base, i wonder how long its been on it? its in awesome shape, appears to have been ran but very clean piston and bore. no wear on the clutch. this was the first year of the vertical rotary free air engine.

Hello again all, So I've got two Moto Skeeter 550s. Until recently, both ran like a charm, then one won't start any longer. Compression testing shows 100 psi for the 'running' skeeter and only 60 for the other. So I guess that tells the tale....curious though, what kind of compression...

OK so my friend found this mini pocket bike on the side of the road and puts it in his car and brings it to me. i look at it and fist thing is both tires are flat the parts have quite a bit of rust but the frame looks like its in good shape. the worsting is it electric and the battery is dead...

has anybody have any experience with this carb orig 450 bse 2 cycle carb i'm going to try it tomorrow it don't want to idle (just off and loud) :shrug: