projects

Besides a minibike project, what else are you working on? Along with the minibike for my son, I'm working on a 1957 Ford F100. Grafted in a volare front clip and dropped in a 351W. Working on all the plumbing for the engine now. Ted

this is another one of my projects i have been working on i am using an hs 50 for the motor this is my second chopper build in the process let me know what ya think and or any ideas :scooter:

here is what i have. started looking for a mini about then the bug bit now i have 6. the bike with the gas tank has a motor that say king cobra by nova, but i think the tank is a rupp. the red one with metal seat pan looks alot like the sears i have but, mount braces and forks look different. i...

Ok here are my 2 Bonanza projects...The one is 1992 GM Bright Aqua and the other is House of Kolor Pearl Tangelo.... after putting the tanks and fenders up to thebikes they look a little too plain so I am looking for some ideas on what I should do to them... Leave them as is or add some stripes...

I am new to your forum but think its great and hope I cab find shows or swap meets in the north texas area. Anyway I fininshed the white MTD abiut a month ago and then went to work on the K&S which was a bigger project as I only had the frame and bars to start with but it was a lot of fun...

I have purchased several minibikes in the past few weeks and need to sell a few of them to fund other ones that I like the better. All are rollers and all include a 5hp Briggs. Engines don't run yet (just haven't got around to fixing them up) but all have good compression and shouldn't take much...

About a week and a half ago I picked up these 2 rollers. One is a bird and the other is an Arco. I stripped both of them to bare metal and fabricated a scrub brake for both.The Birds forks were just slightly bent in, so I heated them up and straightened them , and while I was at it I heated the...

This is gonna be my finial 2 personal drag project motors. So I figured i will go all out on them. This is my billet briggs motor, Project "Outlaw" This is my gx200 Honda motor, Project "Top Fuel" Custom Crank Custom Block Work Mocking it up, after paint Mocking...

http://www.oldminibikes.com/forum/general-minibike-talk/28696-my-first-2-mini-bikes-woooooo-projects-good-times-coming.html Today I FINALLY had some time to "work" on Duster chopper. Took off the motor, CLEANED it, motor plate, tires (front is pretty dry rotted). While it was off I changes...

Just a few of my never gonna get finished projects.

Whats up guys, it's been awhile since i've posted. We have had some really nice weather the past couple of weeks, it felt great to get out in the garage again. The first thing i got running was my azusa. Last summer I had put a honda clone 6.5hp, but it now has a honda 5.5hp and a scrub brake...

Picked up a couple of rupps tonight..Not sure what model?..Hopefully I can make one good one out of the two....The motor in the frame is supposed to be a 7hp tecumseh and the other one is supposed to be a 4hp honda?

just got my bad dog kit with slicks and found what I think is a super bronc at a flea market for 200.00 it runs too. I'll put some pictures on when I figure out how.

Lets see them pictures of all those minis stuffed and stacked away for that someday Project ?? I have way way to many to finish , infact I should get rid of a couple ,, But ??? I will go out and get a picture of the garage soon ,, :thumbsup: Since I know Small bikes I vote him as the leader...

im new here and i have a mid 60s trailhorse gto 800 roller that i got at the local go kart parts shop for $50. i put a running 2 cycle engine on it that i got for free. i also am building a custom 58cushman eagle starting with a kinda beat frame i got for free. it has wheel and tires off of a...

bonanza project? raked front forks, air bag suspension, jackshaft, try spoke wheels. can be fitted with small pump. to lift or drop rear. any body looking for a project bike? view my pictures.

Well after recieving this bike , for free:thumbsup: a little tlc was needed. heres what i did so far to the bike. - made new cables at work, throttle and brake - replaced all wires, with a thicker gage, added wire loom - wire wheeled all the rust. mostly the rims and rear springs. -...

Just want to cover my bases here but its just as the title says. Looking to trade a complete MTD Trail-Flite bike for 6-inch wheel Ruttman & Lil-Indian projects or Arctic Cat Ramrod projects. You can see examples of what im looking for and a description & pics of my bike that im willing to...