OldMiniBikes has 3 to choose from. this is going on the GX390. lift is no more than 3 inches. tank outlet is lower than it should and moving the tank is not an option. i could build another tank but want to ride. not sure if these will pump enough for a 390 or not. any thoughts on these?
Kawasaki...
A buddy of mine had this taking up space in his garage and told me to take it home and mess with it.
He is looking foe the shroud and said he knows he has it just don't know where its at right now.
So here's some pics .....
The numbers on the tag read MODEL 6FB TYPE 105542 SERIAL NO...
been having a problem with my walbro fuel pump.. fuel leaks out of the top vent hole and no gas will get to the carb.. I don't know what's wrong
when I say leaks I mean there's a steady stream of gas flowing out if gas tank is filled and the leak dies down when there's not as much gas in the...
raceseng 1.2 billet roller rockers - 150
22mm mikuni with 130 main 17.5 pilot and intake manifold with air filter - 80$
5 bolt valve cover with gasket and pulse fitting for mikuni and mikuni fuel pump - 55$
stock predator parts
stock predator rod - 15
stock predator piston & rings...
have a 5hp Honda from a power washer on this ol bike, can I remove the fuel pump and use a gravity fed tank mounted up top in front of seat?
thanks for your help.
Installed fuel pump on my super bronc with a hm100 . I used the block pulse fitting that the stock one ran off of . The pump works just fine but it seeps oil out of the back of the pump . Is this normal ? could I use the breather tube that comes out the little valve cover ? The block pulse...
Help ,i need to put a fuel pump on a Robins-subaroo engine that is on a Utility vehicle sold at the big building supply stores.The owner had me put a larger capacity fuel tank on it instead of the 1 gallon one that is right over the carb.now after 2 foot of fuel line to go through the gas won't...
Does any one out there have a diagram or video of how the cam-driven oil pump works on a Tecumseh?
Question#2-Does an internal oil pump enable the engine to operate at different angles?
Thanks for any replies.
Brand new never used Carb from Hot Rod Minis for the 97cc motor. Designed to fix the cut off problems $30 shipped. Also a walbro fuel pump never used $10 shipped. I can be reached direct at
cbuczkowski@mragta.com
Thanks
Question,
What are the befits of adding a fuel pump even though my tank is above the carb?
The motor try's to die when I come to a stop and have to keep giving it just a little gas.
Can someone explain to me when this is needed and how i would install it? i have a the Predator engine and just did these mods:
KN style filter
Velocity stack adapter
Manifold spacer (with Pulse fitting)
#90 main jet
140 Emulsion tube
Header and briggs muffler
Racing plug
Do i...
Hello all. Wondering if anyone has a GC 160 pump? I believe the 4 and 5hp GC type engines have the same pump but I could be wrong. Please let me know.
Thanks
Jay
Hey so i recently bought an older 10 briggs and stratton that was originally from a monarch pump model ff-25. I can't really get any other details as the sticker has fallen off. Was wondering if anyone could tell me how to start it as there is no rope pull. Do I need an external starter or...
I'm looking for a source to buy a bunch of the little gasket on the side of the pulse fed carbs AKA the fuel pump, or a part # I want to have a bunch on hand cause they dry out all the time here in the desert. Amazon or eBay seller would be great, thanks ahead.
Got a clone 390 with a stock carb and a Mikuni fuel pump attached. Runs good with out the pump. Carb runs fuel out the shut off valve and around the float bowl with the pump attached. Too much fuel pressure. How do I reduce pressure output on this pump?? Its not the float adjustment. Tank is...
i am thinkin bout buying a honda odyssey that the fella says has a bad fuel pump and am wondering if i can make sure the engine isnt bad somehow?
thanks guys
OK I was just looking to see what gas prices are in California now.
I use Chevron as my credit card and use unleaded regular. So if your in the I-5 area the information might be helpful to me. Hoping that after the next holiday the price will start coming down.
Steve :scooter:
I just bought a 4K generator from Northern about three months ago, and was starting the thing just as a matter of good course.
Anyway after pulling WAY too much I got it to run as I fiddled with the choke.
From full to half and back again over and over, I got it to run for several...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.