return

Here is a photo of my Briggs 2hp that came on my Bonanza. It is a 1987 motor, model 60102. It arrived with the big return spring coming off a head bolt, obviously wrong. What is the correct set up for the return spring? It looks like there could have been a spring that wraps around the...

I am trying to track down an owners/parts manual. Also I am trying to find a shifter return spring or what it should look like so I can create one for my SST Gemini. Any info could help, thanks!!!

I found this earlier after spending around four hours trying to find a solution for this. https://www.youtube.com/watch?v=OwshTzB3Roo

A neighbor brought me her son's DB30 that is in ROUGH shape and wanted me to fix it up for them. One big issue I see is that the front end is really loose, looks like nearly all of the bearings are gone. I see posts about people switching over to the sealed bearings. Before I take the front...

Hey guys I just cleaned out my carburetor for on my scat-cat mini bike which has a 3.5HP Tecumseh motor on it (Tecumseh/H35-45621S). As I was about to connect the fuel line, I noticed when I give it throttle, it (not sure what the name of the part is) doesn't come back to it's starting point...

Hi all. I tried to search for this problem but couldn't find anything. the lever in the pic with the red arrow use to move back and forth very easily. I would move it back and it would return to it original position. now it does not return to its original position AND the whole lever moves...

My predator throttle linkage is having a hard time returning back to 0. i loosened the nut to make the linkage more freely but still having a hard time. the motor is in a baja doodlebug and using the stock throttle. and shouldnt the throttle control spring back once u let go of the throttle...

After much time away I am returning. I gave up Mini bikes due to this thread that was made about me , Divorce , Health and other reasons but I am back. I finally went over to Terry Nash's to deal with the "Broken motor" , that wasn't actually broken, Took me almost a year to even wanna see...

Just picked up an '02 Flee, want to put the original tank back on the ASAP, as it just looks ghetto with its current setup (allthough it works great). I'm confused as to how it would have originally been setup though as the original tank just has the petcock outlet and thats it (typical vintage...

I see that Allied Leisure has Lil Indian brake return springs back on ebay. But, the pic & the specs don't add up. The pic.... The specs... 3 1/8" overall length 1 1/2" coil length 1/16" wire 7/16 coil diameter If you count the number of coils in the pic, multiply by...

I have a quick question. From what I see teh disc brakes from bicycles do not need a return spring but Go Kart GoCart Minibike Mini Bike Brake Disc Caliper | eBay does. Is that correct? Thanks

Where do ya'll get those goofy springs that go on the brake cable for a clutch band brake? Thank you in advance.

Does anyone have any good pictures or instruction on how to hook the Rupp Tecumseh Throttle Return Spring. Thanks-Mike

Does anyone have any good pictures or instruction on how to hook the Rupp Tecumseh Throttle Return Spring. Thanks-Mike

Should i use a return spring on a brake band on a clutch brake. (placing the spring over the cable betweeen opening) With out the spring the band seems to ride very slightly on the clutch bell. When i put a return spring on the brake band cable the brake handle came back firmer but the band...

Does the engine come with a throttle return mechanism installed? Or do you have to install one? What about a throttle return spring? Thank you!

I need a carb kit for my 8 hp Tecumseh on my super bronc. I also need the return spring for the throttle, any good sources? I also do not have my model number handy, so I am not sure the exact parts I need. Any help is greatly appreciated. Thanks.

the throttle wont return on my duddle bug all the way. i have the stock motor. you have to rap on the throttle a few times to get it to return. that long spring doesnt seem to push the throttle back all the way. any help will great.

ok i did a stupid move i wasnt careful with the old brittle tube and i broke the return tube off my 5hp briggs carb. is this gonna cause any problems besides fuel trying to spray out? when the tank is not on it? because it broke flush at the botton of the carb

i see some of the HIGH performance motors running a head gasket that blocks the oil return? whats the situation there? what gain is there in this?