runs

Well I got the H70 Tecumseh running finally I really think these engine like to mess with you for about 3 days before they decide to run decent. Went thur the carb, replaced the points & condenser and changed the coil and installed a helicoil in the spark plug hole. Now its to wash it down...

ok, i got a briggs 5hp with a techumseh carb off an HS40, and a slanted manifold from the HS40 all to go on my rupp, so it started very first pull, and ran great, but the idle was a tad high, so i lowered it a bit, and it just stopped, started it up again, with the idle back where it was...

I am selling this nice Tecumseh HS50. This is actually the best running tecumseh I own as it starts easy and idles very smooth. That was the last time I ran it just a few months ago before I drained the gas (emptied the carb as well so carb is not gummed up) and stored it in my dry basement...

I just picked up a baja blitz for my kids. It fires up first pull with choke, idles fine when choke is turned off but as soon as i open the throttle it dies. It will idle and accelerate at half choke but not when the choke is off. I am going to replace the plug and change the oil after work...

My Gx390 DragMini first runs, GX390 has a carb, header, billet rod and flywheel. All else is Stock. Cam and springs wouldnt allow it to run past the 1/8th mile. New head, cam and carb being added this week.... Me On it YouTube - JD Making a few Passes on the Drag Mini Baby Making a...

times are tough

I recently acquired a never ran lifan clone motor. After getting it assembled and setup, i could not for the life of me get it to run. After many hours, I discovered, if quirt fuel directly through the carb into the engine, fully engage the choke, and open the throttle up I can get the engine to...

tote gote mini bike looks like a great deal.

i have Atlas minibike for sale. the motor is new 6.5 hp maybe 2 hours running time on it. the seat needs a cover on it. i lost the master link to the chain. it has a ton of pwr . its hard to keep the front wheel on the ground . even wile ridding it. $300 local buyers im in the KS area or add...

mini bike it runs 5HP $240 unknown make . take a look at that frame . no shipping shawnee ks area

mini bike all there and runs $240 im not shure of the make. local buyers 66218 shawnee KS no shipping

this motor is complete and runs great that is why im asking $175+ shipping has extra large tank my zip is 48192

Is there any known rides in the UK, with these sorts of minibikes. Not a pocket bike or minimoto event, but these old classics?

i've got a DB30 i'm looking to get rid of. i bought it and was going to do a 6.5 swap but lost interest and don't have the money/space to do it now. it's missing the rear fender and the powder coat looks like shit (plus i started sanding the front fender). the stock motor leaks gas when it...