tubes

Well I just ordered the new tires (2.5-10) for my Bird Thunderbird. The rims both have some bent areas I will be taking a sledge to this weekend to get the bead back into shape. Found some nice tires at Motorcycle Superstore - Kenda K329 Front/Rear Scooter Tire, with tubes and rim strips for...

I wanted to replace my stock valve springs to eliminate high rpm valve float. I talked to one of the techs at one of the performance companies an was told that the 18# springs aren't as good as everyone thinks and that I would be better off with the trick springs. He said the trick springs...

Got some new astro wheels and trying to install tubes. But here's the problem,the tube seems like the inner part is to small for the rim. The tube size matches the tire size but I can't get it to stuff in the rim between the halves. Any tricks?

hey guys, I bought 145/70-6 tires from royal distributor about a week ago, and they came shipped flat. I got the tire over the rim, the problem is that they are impossible to inflate. So i decided to buy a tube and put it inside, unless one of your guys know how to inflate it. If so, please...

i have two new tires and tubes for a rupp hustler 10 inch street use brand new want 40.00 for all must pick up yourself sunland ca and a par of mx bars clean 10.00 7 foot of new 35 chain 10.00 4 new master links for 35 chain 4.00 hilard clutch new 25.00 exast for honda cx-200 with muffler...

12" Rupp Trails tires with nubs still on them. $50 plus shipping (local pick up by appointment only) for the pair of tires plus free extras: the tubes and rim bands (still have some rust chunks on them). I bought a pair of 12" Rupp wheels that had lots of rust on them but the tires looked...

The same tires and tubes that are sold on this site. Mounted but never put any miles on them. Still new, but may have some grease from installing them on the rims. $50.00 for 2 tires and 2 tubes.

Brand new set of 5" Azusa Tri-Stars w/ new tubes and tires. Never been used, the were bought for my old man's Sears Roper project and he went a different direction with it. Located in West Palm Beach, FL Asking $100 shipped to anywhere in the lower 48. PayPal = :thumbsup:

I have 2 real nice 5" manco wheels with new 4.00-5 tires and new tubes..I recently purchased the tires and tubes ($50).... they have yet to be mounted...the wheels are just setting in the tires in the pics.. There is also the spacer for the sprocket..... Before anyone asks, I won't seperate...

I have a pair of these with tubes, everything is brand new, never mounted. Was going to use them on my Trail Horse but wouldn't fit with the fender mount I added. I don't have any projects upcoming that I need them for and they are taking up room. $50 shipped USPS Priority 2-3 day - paypal...

2) New Cheng Shin 4.10/3.5-5 slicks(Never used!) 2) tubes still in wrapper Ames, Ia $40 shipped(to 48 lower states) or $30 pickup

Selling a brand new set of 4" wheels, tires and tubes... 4" Azusalite split rim wheel. 2.92" bolt circle circle. Grade 5 hardware. Tough and lightweight. Corrosion-proof, solvent resistant. Specially engineered Zytel Nylon compound. 3" wide with 5/8" ID ball bearings. 410 x 350 x 4 Turf...

Original Pirelli brand. For use on Fantic Bronccos. $8 each. Located in Durham, NC

Looking for a set of Broncco TX-1 fork lower tubes , any condition but must be straight or left bent so I can straighten them correctly . Mine have been bent and straightened and they did a lousy job of it . I am going to powdercoat the new ones so a rusty appearance is not a problem . Thanks

brand new set, great for a bonanza restore or any 6 inch rimmed mini bike includes two new inner tubes also.. asking $40 shipped

Lil Indian Original 4" General Tires & Tubes

I know this is a long shot but does anybody have a set of good working fork tubes for 16" wheeled Fox bike? No springers.

Any one know of a good CHEAP silencer for them. I got a ( this is from Ezboreracing on ebay ) is any of this true and where can i get a muffler for it. FB-VM curved muffler header. It is a 2-stage, 17" pipe with a 1.150 I.D. This is a venturi pipe with a broad power band for stock engines

check it out and im gunna get one and post pics and mabey a video of how its sounds

Hey guys - does anyone know how to size the correct tube dimension for a Western Flyer wheel? I ordered a wheels and tires online and did not get the right size tubes. Any input would be greatly appreciated. I'm thinking I should just take the tire and wheel assembly to a motorcycle shop.