warrior

I have 2 Baja Warriors. One runs like a champ and it is even the most used up of the 2. The better one wouldn't idle without the choke closed about 3/4 of the way. So I pulled the carb off and took it apart expecting to find it full of crud. I was pleasantly surprised to find it very clean. So I...

The brake assembly shattered on my 1 month old Baja MB200 today. Not really sure what happened, I pulled the break lever, and the whole aluminum assembly shattered and sent shards of metal everywhere. The brakes were terrible to begin with, so I was wondering if there was a Honda brand drum...

Hey guys I just bought a Baja warrior rolling frame and I'm about to purchase a 212 predator for it. I saw with research on the site that this comes with a 196 motor and it has a torque converter. My question is do I need a torque converter for the setup? I'm just trying to build this as cheap...

I know this question has been asked a lot but I have a baja warrior. The original motor was blown when I got it so harbor freight had a deal on the predator engine. I only put only an hour on it and now winter has come I wanna fix it up. The motors are similar so the original motor broke the...

I've had my warrior 165 apart so long that I can't remember which steering bearing cup goes in the top of the frame and which goes in the bottom. One is a bit taller than the other. I also assume that the caged beaings go in with the more exposed balls facing into the cups, right? Any pics you...

I was repairing my mother's Baja Warrior Mini Bike, took off the gas tank, throttle cable and carb, but when I went to re connect everything, for some strange reason, the governor arm that goes in engine , is causing the throttle to be almost wide open when I re connect the governor spring...

hello, new to the site and having a issue with a warrior 200. bought it a few yrs ago and its been ridden a handful of times. bike has maybe 3 hrs tops on it. went to start it today and it would only run with the choke on, as soon as choke was off it died. so took the carb all apart and sprayed...

i have a baja warrior with a home lite 196cc engine and a torque converter on it. fyi i'm a big guy 260lb well i was riding it pretty hard jumping small hill's getting a little air and such when i parked it i shut it off come back a hour later and she seems to have lost her power unless i...

Has anyone been able to find reproduced metal fenders for the baja warrior. Going to be doing custom paint and airbrush on my bike this winter and just want new parts

The chain on my warrior is rubbing against the nut that holds on the tensioner arm (or whatever it's called). You can see the nut in the middle of the pic. It's almost like the chain is too long, but I counted the links and counted the links on an internet picture, and it seems the same...

I have a Baja Warrior 200 that is in very good condition for sale. The bike needs nothing and has a lot of mods on it. It has a torque converter(with a brand new spare belt), K&N style filter with rejetted carb and a Hot Rod Mini Bikes header. I put some real Harley pegs on it too which makes it...

The local town of Rockford today is hosting "Rockford Ninja Warrior" and they flew in a bunch of the TV ninjas! Event info here ... Rockford Ninja Warrior - Rockford, Michigan July 17 - 18, 2015 They have several courses for kids and the main one for the adults to run. The Pros will run 2...

I still have to to do some stencils, and im probably going to add an ammo box directly behind the seat over the fender, and i have an aluminum canteen i am going to make a small satchel attached to the bike to hold as a reserve fuel tank. the tank was acid dipped and took forever to seal back...

ISO Anybody got a rear wheel laying around for a Baja warrior ? I could use a wheel and tire if anybody has them . I also need two chain guards if anybody has them . The chain guard that attaches to the motor is what I need . Thanks Dalva

I had planned on a TAV and a pred 212 satge 1 or 2 or a pred 301 replacement on said bike. Does this bike have a charging coil on the original engine? And has anyone done the swap and kept light working?

Found a BW on Craigslist. Went to go see it and the sheet metal shocks frame is all good. The original air cleaner is MIA so starting the bike before purchase was not going to happen. at any rate I figure its a small engine that has compresion, whats the worst that could happen, right...

Rear wheel for Baja Warrior. If it comes with brakes even better. This is for a project bike surprise for three girls. Thank you

I have a 6.5hp 196cc Baja warrior. I want to make it faster. I have heard about bypassing or removing the governor, but I don't want to blow the engine. I was thinking of installing an 8hp predator and a torque converter. But I would need to stretch the frame to fit the engine. I need it to go...

Hello all,I`m new to this site,.I just pick up a baja warrior frame(had a blown 6.5) I`m in the middle of sanding down,My ? is I read alot of threads and almost all of them said to go HF and pick up 6.5,However I`m more intrested in putting a 10-13hp in it.I know that I have to change the engine...

Hi all. I haven't posted in a long time! I am considering selling my used Baja Warrior MB200. It served its purpose of being something fun to work on/learn from and ride for this past fall till now (little more than 8 months of intermittent use). I've never jumped the bike, but have ridden...