wiring

Looking for complete harness OR schematic OR just pictures of a Coleman Sport 2.4 wiring harness. If you can help me...262 930-4760

I just picked up a complete ( as yet to be determined, looks like a jigsaw puzzle), Go Devil even got a ratted out carrying bag. What's with the wiring harness? Along with the spark plug wire, there's a kill button wire and two others that are unknown. What I thought was old electric tape, and...

i been on this one for around 2 years now. waiting for my decals. and finish up wiring. :smile:

Does anyone know where I might be able to find a NOS or reprint operator manual for a 1972 Arctic Cat Prowler mini-bike which illustrates a wiring diagram ? Or a wiring diagram for a Sachs Saxonette engine that runs a headlight and brake light ? Thanks !!

Allright everyone! I just picked up a Baja mini( I think lol) last night before I went to work, I'm 70 bucks into it. It deffinitely neeDs some tlc. The main thing I'm here to ask about is the wiring. It looks like someone just dropped an engine n it to make a quick sell, basically the whole...

The engine is about 6 months old. It gets fire to the plug and the gas is going to carb so i figure its the on/off wiring on motor that is connected to kill switch but I am not sure. Has anyone had this happen to them? Any suggestions?

First rebuild, unable to locate any info regarding the wiring for this H70. Can anyone give a quick explanation of how this works? Also, spark plug wire boot/terminal came apart on me. Can I put on any old terminal and boot or is there a specific replacement part I should be looking for...

Just like the title states; I need some pictures of the rectifier to coil and kill-switch (basically all the wiring, lol). The bike ran fine for as long as I had it. Then for some unknown reason I took the condenser off. It sat at my dads place and he took it out to start it one day...

When I replaced the throttle assembly on my H30 for a cable throttle setup, I noticed a kill wire that I had to disconnect in order to remove the old assembly. Is this the wire I connect to when I hook up a handle-mounted kill switch? This is the switch I'm buying: TOGGLE TYPE KILL...

Building a predator engine for my sons Motovox mini bike. The kill switch on the handle bars is crucial for this. How do i wire the Motovox Kill switch to the predator engine? Any input would be great thanks.

Ok fellas pretty simple question. I just got a Tec with a lighting coil. The wires and plug are there. One red, black and green? I think. Please tell me what wire does what? Thanks

So, i found a Honda GX160 in the aluminum dumpster at the junkyard.. Looks like Smokey was the one who unloaded it, judging by the excavator damage to the sheet metal.. :glare: It looks as if the (stuff) is there and good, original key and all.. It was zip tied to the shroud.. :confused: I...

I bought a 77' CT70 with no keyed ignition on it and I was wondering what wires I have to have connected together to get it to run. I want to say there's about six wires hanging out.

Hi. I have acquired a Baja Warrior. The wiring of the Headlamp -Headlight has been cut. It has a connector on the headlamp wires. There is also a switch on the handle bars that was either a headlight switch or kill switch. I wired the switch on the handle bars as a kill switch. Can...

My k3 z50 has no headlight and a broken switch. It originally had an on/off switch with 2 wires and the headlight as well had 2 wires. But the aftermarket headlights and switches have three wires and instead of on/off its high/low. It looks like the new wire on each are both white, one with male...

I need a wiring harness for a 1980 Honda ct 70

Does anyone have a wiring diagram for the original switch on a 1970 Rupp Roadster? Is the headlight supposed to be on in all 3 switch positions? Currently mine is. I have the red wire on the "wiper" the blue and green wires for the headlight are on the two center posts and the tail light...

Rewiring my Alsport utility by this print. Only problem is they don't detail the igntion switch very well. Terminals on my switch are B, G, L, S, M I'm assuming the "L" term on my switch takes the place of the "A" term on the print for the lights. "B" is + battery. "S" activates the...

I have a 5 hp Briggs fun power with electric start. it has the single wire with red connector. from what I have found, the wire is 1.2 amp unregulated DC. What I am trying to figure out is: Can I run this straight to the battery to charge or do I need a regulator or what?? Also: what would b the...

I picked up another Predator Engine for my MB 165 tonight and was curious how I could wire in the Light. I junked the old 5.5 Honda Clone that originally came with it for one of these. I noticed I had to take the Hotwire of the coil but to do that. I had to take the whole right side of the...