My original intention with this bike was to make a nice full suspension rider for Windber. I procured a set of front struts with springs and a set of rear shocks to get the project moving along. I was all prepared to start cutting the front forks and the frame when I noticed that the Azusa frame and forks are very narrow. After taking some measurements I discovered that I will have to widen the front forks and the frame to accomadate my wheels and tires. So now I have to modify the frame for a rear swing arm suspension and the wider tires. Actually making the frame wider will also allow for a wider, more comfy seat. :wink:
Before anyone brings it up, I have no intention of getting a narrower set of wheels and tires. I WILL MAKE THESE FIT. :thumbsup: