I picked this up about 18 years ago when I was doing a job at headquarters Harrisburg and had to make brushes for it as I could not find any replacements.
It ran but not good enough to even run a small drill so I threw it in the shed and now I am off till the first of the year decided to pull it out and see what could be done with it. I have done searches by the model number but get nothing and was hopeing someone on here may have some info.
From what I can find it is fixed speed as there is no throtle plate only a choke and I have pulled off the generator case to clean up the armature and check bearings.(Model 20A 115-3)
1219021144 by kzhorse, on Flickr
1219021144c by kzhorse, on Flickr
1219021145 by kzhorse, on Flickr
1219021145a by kzhorse, on Flickr
1219021145b by kzhorse, on Flickr
1219021144a by kzhorse, on Flickr
1219021144b by kzhorse, on Flickr
Scott
It ran but not good enough to even run a small drill so I threw it in the shed and now I am off till the first of the year decided to pull it out and see what could be done with it. I have done searches by the model number but get nothing and was hopeing someone on here may have some info.
From what I can find it is fixed speed as there is no throtle plate only a choke and I have pulled off the generator case to clean up the armature and check bearings.(Model 20A 115-3)
1219021144 by kzhorse, on Flickr
1219021144c by kzhorse, on Flickr
1219021145 by kzhorse, on Flickr
1219021145a by kzhorse, on Flickr
1219021145b by kzhorse, on Flickr
1219021144a by kzhorse, on Flickr
1219021144b by kzhorse, on Flickr
Scott