My house has a detached garage that shares a roof and attic space, but has a breezeway in between. Walls are stucco. Inside I have a wireless setup that our home PC uses and we also use for a laptop and cel phones.
Problem is that I want to set up a PC in the garage, but already the laptop...
Seen this throttle setup while searching around and would like to know where or if this can bought somewhere? I know BMI has the linkage that mounts to the top of the motor but where does the linkage/arms on the carb come from?
Briggs Flathead / Raptor Throttle Linkage Kit : Go Karts Parts...
Put a new engine on my Sears puddlejumper today. I had to tap and drill the crank, it was a breeze with my drill and tap jigs (thanks ScooterBoy!:thumbsup :) . Anyway, as you can see, the frame has a swingarm suspended with shocks. My problem is getting the chain adjustment right. When I sit on...
Anybody know what the springs are set up for on lockup? I would like to know what they are for primary and secondary clutches. I want to build my own setup for a built motor,but I would like an idea of what the original setup were.I,m going to use disc clutches instead for better tuning.
I just finished my Speedway widowmaker with a centrifugal clutch setup. I used the original jackshaft and gearing (JS output/tire side). I am using a HF 6.5 clone stock. So my gearing is a 10 tooth on the clutch-10 tooth JS input-8 tooth JS output-60 tooth on the tire. Now I used 2 separate...
Looking for suggestions for connecting a throttle cable to the HF 2.5 hp motor (DB30). The linkage setup on the new motor is totally different from the original motor. Did a web search, found a lot about the 6.5 clone, but not much on the 2.5 hp. Anyone have a good solution? Thanks.
I bought a HF clone off craigslist that someone had a DIY linkage setup on. I have all of the original parts to return it to stock but I have no pictures or anything on how this works. From what I've found here by searching is that there is a linkage and spring coming from under the tank that...
building a clone for my db whats a good all around gear ratio ? i mainly ride around my house which is asphalt and i aslo take it to the mountians and trail ride:shrug:
I don't have a jackshaft and my rear tire is 11.5'' O.D front sprocket is 12tooth and rear is 72 tooth good pull but poor top end with a H 35 tec flat head
ungoverned. What's the best clutch and how many tooth for the best top end but still pull a 170lb person?:scooter:
anyone tried this mod? I copied this response out of another thread- contributed by "altered 7151", but I didn't see any follow-ups to his suggestion..... want to know if anyone has had success with this- quoted below:
"For a double kill switch you just need to make the circuit go to ground...
How would you mount a torque converter to a doodlbug with a 6.5 clone. I probably wont, but i want to know how. Would you HAVE to have a jackshaft? Send me link, pictures and anything that will help.
anybody seen a scrub brake setup for sale? I cant find one on ebay or any of the shops i've found via google.
i see disk & drum brake setups, but i need to go as cheap as possible here.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.