also I wanted to mention the lifters that I was talking about for the ohh-motors are different then the flatheads so there isn't any confusion when a person wants to order lifters. for example : lifters for the newer compression relief cam. on a ohh-motor the lifters are cup for the push rod.
I figure it would be better to keep this type of information with this engine build and it might make it easyer to understand with a picture posted of the lifter for a ohh-motor.
![](https://preview.ibb.co/jnzB20/20181115-003339-1.jpg)
I figure it would be better to keep this type of information with this engine build and it might make it easyer to understand with a picture posted of the lifter for a ohh-motor.
![](https://image.ibb.co/hCM95L/thump.png)