Search results

I did try flipping the sprocket inboard. It still wasn't enough. I was able to get a 79 cc motor in the frame much easier. I suppose I could have added a jack shaft, but I'm not that committed to the project yet.

Sorry, new here. I just picked up a frame from a friend. Getting it home, I tried to get a predator 212 engine in the frame. It didn't fit. The exhaust and the carb didn't allow the motor to sit in the frame. i realize these could probably be relocated, but my biggest concern was the...

Thanks everyone. 1" tube is a lot easier for me. I'll do some more looking for components that fit. It really is just the throttle and brake that come to mind.

Just getting started doing some research on building a mini bike from scratch as a good winter project. I want to fabricate the frame. From what I can find, the tube size used is 7/8" OD. This works well for the throttle, brake, etc. that are sized for a 7/8 inch tube. Problem is, I can't...