I need to replace the points and condenser on my HH70 Tecumseh due to a no-spark situation. The manual says I can set the points "by rotating the crankshaft until the point arm is resting on the high side of the ignition cam."
My problem is I can't really tell where the highest point in the...
The condenser in my HS40 us badly rusted so I wanted to replace it. Visually, it appears that a number 29177 may be correct, but I also have a similar condenser that is about two-thirds the length of the original or the 29177. Two questions:
1) which condenser is correct?
2) does the...
Only asking because the set I have ,the condenser mount is not the same and it is smaller, the part # I have is kit # 730523. this is going on a Rupp Hustler 4 HP.
Thanks
I am working on an old Tecumseh AH 817 MB engine. When I talked to the guy who owned it before me, he said it had no spark. He said he had tried putting in a different condenser but still had the same problem. I noticed when I took it apart that he had pinched the wire and I thought that may be...
anyone have a condenser for an old Subaru robin ey20 laying around. I called the manufacturer...they don't have any in stock and have to order it from Japan.
Are all mag type ignition system condensers theoretically the same? I have a antique Wards engine I'm working on and it has no spark. When I pulled the flywheel the condenser was in pieces? So I would assume that was the problem? I sanded the points and gaped them, found a condenser laying...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.