H35 Difficult To Cold Start

Demerest

Active Member
#1
I have an H35 that I did some work on which included a new carburetor. The old carb had a primer bulb and it always started right up with a couple of pumps. The new carb has a choke and is difficult to start cold. Once the engine warms up it starts on the first pull every time. Is there anything that will help remedy this?
 
#2
I have an H35 that I did some work on which included a new carburetor. The old carb had a primer bulb and it always started right up with a couple of pumps. The new carb has a choke and is difficult to start cold. Once the engine warms up it starts on the first pull every time. Is there anything that will help remedy this?
 
Top