running

hey everone,had my lil indian for about 6 year now andhas just been sat in the shed gathering dust so started on a new project decidied to ditch the gx160 and do something different so Iv modified the frame to fit a lifan 140cc engine in, had to modify up a new 420 pitch sprocket to replace...

Hi everyone! Just uncovered my old 1971 AC Prowler. Needless to say, I'm pretty excited! It had stopped running about 15 years ago, and I stashed it in the shed. Came across it today while doing a little Spring cleaning, and was reminded of all the wonderful childhood memories with this...

Just a new member, found this thing basically in pieces, rusted to hell! Today I finished the ruff part of it & got it running on the street! Next will be powder coating and paint. Curious to what year this could be?

just got today 1972 spitfire simplex need tourg guard foot pegs head light speedo hope to find these parts soon will try to have running next month right now in no hurry do need help thanks

A few weeks ago I started collecting the last items I needed to complete this Drover frame I have had for a few decades into a running minibike. Last summer I found a Craftsman 3.5 horse side popper that runs excellent and I'm going to use that on this build. I am not going to attempts a 100...

Hi,, I bought this last week at the Vintage Torque Fest car show in IOWA im pretty sure its a 71 from the brochure pics ,,its mostly all there even have a clutch cover in pretty good shape bearings are shot in the front wheel and the fork triple tree is grinding at the bottom of the neck...

Engine numbers are: HM80-155174 Ser 0011C This engine is off of a Super Bronc that me and the boy are trying to resurrect. I replaced all of the leaking fuel lines and removed and cleaned the carb. We got it started but it won't run for very long. I started it on choke and then take it off...

Guys, I picked this up from a member on here a week or so ago. It's a full complete bike but the motor needs a pull start and cup, and new coil. Other than that, the motor runs etc. It could use a rear tire as well. Just needs tweaked and some TLC and it'd be a good running big tire bike. $300...

Picked this up yesterday and started work on it right away. Like I do t have enough projects. Lol Started to strip the frame. Ran out of daylight so worked on the motor for it through the night. Got it running then tore it down. Plan is to paint it white. It's a h25 just not the side popper...

Hi guys, OK, Life is getting real frustrating here. I have a toasted engine for a Sears Roper and I have both secured a running engine and a block to rebuild the bad engine. In the process I have lost some parts for the TC-88 driver. I always put things in boxes and bags and I must have lost a...

I used the search feature and could not narrow the issue down, my cable comes through front to rear and I believe it probably should load and pull from the rear of the jackshaft plate. I had no indication by how it came given it was in a box of parts. Logic tells me it's grabbing at the cinch...

Any body running these rockers ? ...when installing them they come in contact with the retainer on the exhaust side just a little I'm thinking I need to shim them up anybody run into this problem?

Woke up to yet another snow storm lol The drifts going out to my garage are close to 6 feet high in places Got to love it when you need a running start in the garage to break thru the drifts I am running out of room , have to keep pushing up and back lol Had to...

Good running motor, no clutch or tank. 30 plus shipping

Had a short talk with the guy. 700 something CI I6, runs on gas It has a really cool sound when it is running, almost sounds like it's not a gasser.

Found this one last fall on CL down in Cinci. Everything there except carb, tank, air filter, and throttle. The 2-speed jackshaft, shifter, seat, fenders, chain guard all there. A bit of surface rust all over but it didn't see too many miles. Tires hold air and the tread is almost like new...

I have a fairly old Craftsman snowblower (single cyl., 17.5 HP OHV) that refuses to stay running... I had to replace the metal connector from the plug wire to the plug (became damaged) since I removed the plug so many times to check its condition or to unflood the cylinder. Basically, I...

So after being gone for a while i am finally able to get back into what i love doing. So my brother has a ratty DB 30S that im going to liberate and make work so i can have something to ride. It has like 3 different paints on it, Ill paint it in the spring but for nwo to get it running. I need...

Hi folks, I have what I believe to be a 69 fox trail tramp. It has chrome tank, fenders, bars, cage, head light and rear rack. Front and rear disc brakes. 4 hp tecumseh engine. It looks to be all original and in working condition. Even the tires say fox on them! I have put a new...

i am selling this for my old neighbor, it is a 1970 rupp roadster. the rear fender is shot, someone welded it back together. the motor spins, so not locked up, but not running at this time. no kickstand, or chain guard. he is asking $425 obo. pick up in st.louis, mo. cash only. no shipping