I work for a utility company and I work on their equiptment and keep it running.
I was working on a sump pump which has a 5 horse briggs on it just like this.
I replaced the fuel pump diaphram and then the gasket between the head and carb. I have the fuel mix screw backed out about 3/4...
hey guys, my good ol manco and funpower are a great team. i smoke my cousins all day! but, it has a stuttering issue. it runs fine on the street, it roars and smokes my cousin, but as soon as i enter the yard, the race is over, 95% of the time at least. it cuts out a lot and im not sure how to...
i have a 5 hp Tecumseh. it was running when i got it. it sat for a few years till i found a frame that i wanted to put it on. know that it is in a frame i cant get it to stay running. it will stat with the spray starter but just stall like it is not getting gas. i swapped out 3 carbs and still...
what happend
got a good running b/s engine in indeana, got home 2 days later,had other
stops, at home went to start the old modle N but, wont start,checked it out
# 1 no spark
#2 no compression,,,what happend? :doah:
ok i know yall are getting tired of my post but my 5hp model#130202 still will not start. it will fire a few times then backfire some of the times. it has good spark. i has a pulsa jet #2 carb. i have replaced both pick up tubes jet and needle valve. cleaned the carb inside and out many times...
Just got one for the kids, I haven't messed around with one of these in a long time. After finding a suitable oil plug I go to start it and it doesn't want to stay running unless I hold it on 1/4 throttle. I'm thinking it might just be the idle but I'm not sure. Is there something I should...
This has been a long drawn out build.... I have to tune the carb in now but just as it is now she is pretty quick...scared my son when he went to take off easy and yank the front end about a foot LOL....
First pic is what it looked like the day I bought it from Miked January 09, freezing cold...
I could of swore this was discussed before but came up with zilch when using the search button..
I was just curious if anyone runs it and how the engine performs?...I'd assume the carb will have to be retofitted with an alcohol conversion and jetted up quite a bit...
Finally got my Fantic TX-6 running pretty good. After some minor carb modifications, it does pretty good. I've ridden it all over the neighborhood and even managed to get a few guys out with their dirtbikes too. It's a bit rough on powerline trails, but great for streets and sidewalks. I have to...
I went to bolt this up and it's not looking good - Cyl head is in the way. If I clock it down it is lower than the engine - Any ideas? It has the aluminum mounting plate.
LK
Finally got the gasket thanks to strictly hodaka. The reason the kick sart is hanging down is because the return spring is all bent so I'm going to get a new one.
YouTube - Running Hodaka Ace 100
Hello All!
I just purchased a bike with an HS40 engine. My preliminary finding is it won't idle without the choke being half on. Also, it does accelerate right. The idle mixture screw does seem to have much affect on the running. The exhaust seems to get hot quick, so I assume I am running...
i need a replacement for my minibike cause my tecumseh took a crap on me. reason why i need a powersport is cause the rev limmiter is set higher than other engines. so if you have a running one in good condition all be willing to buy it if its a good price.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.