Two stroke Power Products model 1000 engine. Complete except for air filter. Never fitted with a rewind, this was sold as a rope start. Fan shroud has no holes, fitted with pull start style crankshaft nut.
Was marketed in (maybe) 1946 thru 1947 as a "universal" 2HP...
Im having problem on my 1970 Aermacchi Harley 125cc. I am trying to bench test the motor but I am not sure I am doing it right. I have both wires coming out of the magneto connected to the ignition coil. When I test it, I have spark. I don't know if this is the correct way to do it. Someone...
Want to add a 2 stroke smoker to one of my frames.
Would like to run over 40mph and not strain. What would be a minimum size CC and gave good power;Dont want something too small!
Looking at some used snowblowers.
Suggestions?
Anyone have experience with Supertech's 2 stroke oil? Wally world brand is cheap cheap cheap. Ran several gallons through the china girl at 32:1 with the stuff without a hitch (fortunately, china girls will probably run on water if you crank them hard enough).
I run Amsoil in my saws, but...
Anybody have any sources for parts for the 49cc TAS 2 strokes? I found a survivor Keystone, very good condition, except the recoil is missing. I haven't bought it yet but I'm going Monday to buy it.
Sent from my iPhone using Tapatalk
Jacobsen 321 2 Stroke 2.5hp-3hp
This engine is in excellent mechanical condition. It runs great and starts on the second or third pull. This will look good on the small frame bike! This engine did come from an edger that had the muffler mounted on the frame. So it will need a muffler(or I...
I just received my eBay special. This is a Power Products Model 300 opposed twin 2 stroke. It has a steel cable pull start and a top mounted tank. I have not seen a lot of these around. This one is very complete, has great compression, although I have yet to test for spark. If it has no spark, I...
I have a 1978 Sears moped w/ 2hp 2 stroke motor and would like to get a little more out of it. I really need some better take off power and would like a little more top end, currently it does between 30-35mph. What are some basics on modding a 2 stroke motor, are there some simple things that...
Really would like to see this go to a good home. I beleive it to be a 71 allsport trisport with fat tire springer front end. Has the rare single cylinder jlo rockwell 230 2 stroke. Just needs someone who has a little more knowledge to take her home. Just recently rebuilt carb and have new...
I am not sure what is wore out???? The ratchets, the tiny slotted washers but it won't grab anymore???? Just rebuilt the carb and llokin for some parts to make her pull again...... It is a Rockwell 230 jlo.......any help woud be appreciated.
Just picked up an '02 Flee, want to put the original tank back on the ASAP, as it just looks ghetto with its current setup (allthough it works great). I'm confused as to how it would have originally been setup though as the original tank just has the petcock outlet and thats it (typical vintage...
Hi I have an old mini bike dad and I bought about 36 years ago. This was my first bike. It's got a little two stroke 2.5 hp robin on it which I believe is a kn24. It's missing the rip start. Would love to source this part for the re build. Can anyone help me. Any help would be greatly...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.