stroke

Picked this Jacobsen up off a real nice guy from C-list tonight! Said it was on his fathers go kart but the kart was shot and decided to part it out! Said it ran awesome before taking it off.....has great compression....haven't checked spark yet! No re-welds that I could see on case or mounts...

I picked up a Clinton model 500, decal says 2 3/4 HP, anyone ever use one?

Engines in but not wired yet. Waiting for clutch belt to permanently place engine mount plate

Thinking of building a short stroke hemi. Take a gx160 bore it to 70mm , put a flat top piston in it and a hemi head with a black mamba jr. cam. Might be a torque monster !

OK so with some searching around I'm finding different answers, what type of oil is recommended for a Kawasaki MT 1 I picked up this summer. I forgot to ask the PO and I saw that Gatecrasher here has posted some good stuff but his link is now dead. 10W30 engine oil?, Bel ray? Honda GN4...

Has carb but one needle screw is broke off so I'll send an extra rebuildable diaphragm carb along with the engine. Has a stepped 5/8" shaft but a full size clutch can be fitted with some work or a spacer which I've done before, it currently has a #35 pitch 3 inch bell clutch on it that looks...

Do the Tecumseh HS40 and HS50 both have the same stroke?

Steal of a deal if ya can get them to ship 185cc Rotax Engine for sale | other | Mississauga / Peel Region | Kijiji

I picked this up two months ago it was listed on Craigs List in Wichita Falls Texas The seller was adamant about not shipping. Long story short i ended up getting it. Still in the original box untouched the way it was shipped. I really dont want to sell this Gem but i found something that i...

R Tek Engine for Toro CCR2450 CCR3650 Powerclear Lawnboy Insight | eBay This the only 2 stroke that I know of which B&S made. It was produced for a Toro snow-thrower. The engine appears to be ~5HP with a 3/4" keyed shaft. Might make a nice power-plant for a mini-bike. The ebay listing does...

Big Money for a Beautiful engine also owns the NOS HS-40 for Sale New Clinton A 500 2 Cycle Vintage Engine for Vintage Kart or Minibike | eBay

A few years ago I was going to build a Power Products engine for my Rupp Dart cycle I bought this NOS 9/16" clutch assembly from Power Products guru Hank Rotoff...or he told me where to buy it I forget which. I ended up building a Lauson 4 cycle for it. Anyway it is sometimes hard to find the...

Having some issues getting and keeping my Clinton E65 two stroke engine running, long enough for me to get down the driveway. I've cleaned the carb, changed the fuel lines. Fresh gas / oil mix....1/4 pint of sae 30w to a gallon of gas.... per the instructions on the engine. Sometimes the...

[URL=http://s304.photobucket.com/user/jeepme4/media/Mobile%20Uploads/NCM_1412_zpspgfhtwyt.jpg.html][/URL] Not really wanting to sell this, but I just bought a car for the kids and it needs some repairs. Two stroke Clinton E65 LF kart motor. Has great compression, but i have not tried to...

Picked up a few old gems out of the local salvage yard on the weekend. Older fellow brought in 3 old bikes, Yamaha late 60 enduro?, 1978 Yamaha YZ80 in amazing condition still has original decals and plastics, and this mini bike that after several hours or searching the web im still unsure what...

I'm freshening up this old Terra floater 2 stroke. The biggest obstacle for me will be the engine. The rest will be powder coated or replaced. New knobby tires have been ordered.

Hello, I'm looking to branch out from my small herd of 70's Honda minibikes into those Italian job Harley-Davidson minibikes. This was back when H-D with AMF owned a 50 % share of Aermacchi. Anybody got a line on one in the 90 cc to maybe 125 cc size? I know they were two stroke...

The engine has partial governor removed stage 1 kit with arc flywheel. coil gap at .030 valves .002 intake and .003 exhaust top dead center compression stroke. i used factory keyway in the flywheel not the advanced one that came with the stage 1 kit torqued flywheel to 65 foot pounds. now the...

This oldie I picked up a few weeks ago has a frozen exhaust valve. I can tap it back down during the intake stroke and it comes back up during the exhaust stroke but it sticks up. I shot PB down into it. Hopefully that frees it up but any other advice?

I've recently acquired 2 more two stroke motors for when I was looking for something to put on a very tiny pocket bike for my youngest son. Turns out the mount that came on my Power Products AH47 works with all of them. I'm wondering if any of you fabricators out there would like to make me a...