First, HL166B. Came off a running flat head Briggs 5hp today. Gasoline with larger fuel cap, GEM throttle bracket, and filter adapter. $50 plus shipping
Next HL357B. (Written on bottom). Never used by me. Larger billet fuel cap and filter adapter. Gasoline? $35 plus shipping
Last, HL189A...
tillotson alky carb. i was told once you switch you cant go back to reg. gas if it was tinkered with ... havent checked the needles,, came off a alky engine/raptor.
80.00 plus shipping /money order prefered might except paypal have to go through my buddy. out of CA
click on pics to...
I ran into a confusing problem basically my HL360 tilly makes my modded gx200 smoke but not black smoke.. WHITE SMOKE! And oil seeps out the spark plug hole I thought it was the piston and rings but it wasn't I tested out a round slide type 27mm mikuni carb and the white smoke stopped.. I would...
so i got a ec birt hl334wx dominator plus gas carb. i put it on and got it fired up relatively quick warmed up the engine putted around a little kept stalling due to not having set any idle yet per the instructions that came with it. ran awesome when i was hitting the gas. this is a step up from...
What Tillotson carbs are you guys running on your mildly modded GX200/Clones? I'm meaning with the governor removed, billet flywheel, billet con. rod, mild cam, 18lbs springs, high- comp. head, etc.
Any help is greatly appreciated. :thumbsup:
Is it possible to bypass the external fuel pump I currently have hooked up and run fuel directly into the carb inlet without using the "pulse line" inlet with the tank is positioned above the carb. {gravity fed}? If it is, do I just plug that inlet? Thanks!
hl166 gas carb. complete with rebuild and ready to go. no choke. $70 shipped.
hl292 gas carb. complete with rebuild and ready to go. no choke. $75 shipped.
hl314 alky carb. complete with rebuild and ready to go. no choke. $100 shipped.
used popoff gauge in great condition and works good. no...
Gasoline Tilly Hl239B. I was accumulating parts for a flat head build but have since bought a GX200. I've never run this personally. It looks very clean and has a choke.
$55 plus $11 priority shipping to the lower 48.
I have a worked over and really ugly tillotson hl334a carb that runs superb for sale.
it has epoxy filling and then the airhorn was polished for better airflow.
I know very little about the carb other than on my minibike it ran great(5hp briggs ). I changed to a avenger for aesthetic...
Like new tillotson avenger 10b check valve carb (this was custom built by tillotson)
the check valve prevents back feed of fuel through the air horn for non racing applications
comes with 8 extra adjustment needles in varying degrees and points.
$175 shipped
Hey everyone I got a tilly hl 334 ab on my flathead briggs, I'm having some trouble tuning. As I'm coming out of a turn at slower speed and hit full throttle it pops and dies but when I let off the gas it starts to go again. Any suggestions what I should do? I'm running gas, pop off is at 10...
I would welcome anyone's experiences and advice on installing a Tillotson carb on a Tecumseh H50, H60, or H70.
What model carb did you use?
What type of throttle hookup/linkage did you use?
What fuel pump did you use?
Thanks for any information! Any photos of your installation would be...
Hey guys I put a rebuild kit in my tilly carb and when I removed the welch plug I noticed a crack in the carb body. It looks like someone screwed in the screw too far, if that makes any sense lol. How will this affect the carb?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.