tillotson

would like a334wx tillotson gas carb & manifold for briggs 5hp flathead or a comparable tillotson

There are several models of Tillotson carburetor to choose from and there is a bit of confusion as to what the model numbers mean and what size is best for each application. I asked my friend and mentor EC Birt (THE Tillotson man) to help out the mini bikers and we came up with this little...

I got this off Ebay for $25 shipped and hope I can use it for a 5hp briggs with the right intake. I know what it came off of but I wondered if anyone has any knowledge. I had seen the piece of equipment before and as you can see the air cleaner is a Tecumseh but the intake is very odd. Let's...

I'm looking for a tilly 304 on gas for an ok price in a reasonable condition. I would pay more if it had a throttle setup or manifold for a clone but if not then its fine. Let the offers (or lack thereof) begin!

Just in case anybody has one laying around. any rebuildable condition fine.

I bought this from someone who already bolted up the velocity stack and intake. The velocity stack is fine. However, is it just me or did they put the lock nuts on the wrong side of the intake? I mean, how the hell did the guy put those nuts on when they are so close to the carb? How the...

Anybody know the difference in the tillotson hl231-b and the hl239-b

Bought this carb off eBay and am cleaning it up and replacing most of the parts. I've never done one before, so I'm taking my time to hopefully do it right. Here it is in case you've never seen a Tillotson "field stripped". If anyone has any tips, please feel free to share. Picked up this...

Setup for gas, has alcohol Needle to go with it and triple stacks for alky. Billet intake to fix a gx200. Blueprinted By EC. 135.00 obo Shipped. Perfect Condition. Barley used.....

Tillotson HL-314g wanted. no mods done to it.

TILLOTSON CARBURETOR Jr DRAGSTER GOKART MINIBIKE HL239B: eBay Motors (item 250684348865 end time Aug-24-10 14:10:44 PDT)

i think my high speed jet is plugged, anyone know how to open it up? there is a plug on the inner body to access it but i dont know how to remove it or if it can be reinstalled?when i plug the fuel feed on the inner body and blow into it, it wont blow through. but the idle jet does when i do...

Hi! The Centaur scooter work continues. Anyone got a Tillotson HC-11A carb or 39-913 repair kit for sale? This is single diaphram and is used on a CLinton E-65 -1101. It has some different parts than the kits for the HL-13 or HL-44. So far, none of the available references even show this carb...

Anybody have one?

The carb was bought, and never used . I went with a Lectron instead. I have had it sitting in my shop and figure someone could use it. $60 for both.

well guys im on a cleaning spree agian and need to get rid of some stuff. http://i710.photobucket.com/albums/.../Picture136.jpg Flathead bushing block, .030 over 1.250 intake valve 1.125 exhaust ported and decked trued, new stainless valves and single angle valve job, port matched tillotson...

What's the best way to decipher the Tillotson model numbers? Anyone have a sheet for this? Tilley 101 if you will....

Any reason I can't run my Tilly alky carb with the fuel cap on the bottom? The linkage might be easier, and the L and H letters cast into the housing are facing the right way. Also can I turn the fuel cap so the inlet faces the right way? ~HL374A. ~Throttle lever on same side as adjusters...

For anyone who might be interested, here's the service manual for the Tillotson HL carburetors.