tillotson

All carbs listed below have been completely taken apart, cleaned, rebuilt, fulcrum arm set, pop off set, all new stainless allen head bolts/screws. All come with a filter adapter and the screw holes have been filled in and blended. Very nice carbs! Ready to bolt on and run. Send private message...

HL314 gas and alky carburetors. They have been completely taken apart, cleaned, rebuilt, fulcrum arm set, pop off set, all new stainless allen head bolts/screws. comes with a filter adapter and the screw holes have been filled in and blended. 3/4" venturi and a 1" throttle bore. Very nice carbs...

Hi! I have a carb that I recently got Monday. The carb works but doesn't work on my motor. For sale is the carb only! Carb won't be shipped until Tuesday because I'm waiting for a fuel restrainer cap that recently broke off when I was trying to get the fuel lines off so i can fix it before its...

I got an old Tillotson carb off of a Power Products engine that was build from 1946 to the early 50's, so the carb is old. The carb clearly says Tillotson on it, as well as this serial number: MT42A Can anybody identify this carb for me? Because I was thinking if it was big enough I would...

Just replaced all diaphragms and gaskets, carb is fresh and well taken care of. Set up (blueprinted) for a "mild to wild" Honda GX200/Clone on gas. This carb was bp'd by KornDog.:bowdown: $80 shipped, ninjas.

I have alot of tillotson carbs for sale, mostly alky but a couple gas. all have been completely gone thru, cleaned, new complete kits, new stainless bolts, with air filter adapter (velocity stack. carbs look brand new. $85-$125 depending on carb and model. let me know what your looking for. Dustin

This carb is actually called a Baroni/Tryton. It's the same as the carb I run on my gasser minibike motor. Carb is solid billet, and has a throttle bracket on it. 24mm venturi, with 27mm bore $110 shipped, about 1/3 of the new price, slightly used

GX200 with stock sized valves, .265 lift .236 I/E duration cam. going to port and mill the head and eventually install bigger seats and valves, will I be happy with this carb???:confused: PS. will I be able to use 1.3 rockers with this cam or will I have a clearance issue???

I need a replacement carb for my West Bend 820....it has a tilly hl 189a now.....am going to run engine stock on gas with the exception of a thinner head gasket and a pipe.......looking for a HL 304 or?......also need a good tin shroud and a head with good fins.....thanks.

This is a HL314F alky catburetor originally done by EC. It has been completely taken apart, cleaned, rebuilt, fulcrum arm set, pop off set, all new stainless allen head bolts/screws. It comes with a filter adapter and the screw holes have been filled in and blended. It has a 3/4" venturi and a...

Professionally blueprinted carb, set up for alcohol. Freshly rebuilt, all new gaskets/snakeskins. Not pictured, but will be included, is the brass fitting that goes on the pull up plate for the throttle cable. $130 shipped. p/p please.

This is actually an ALKY HR22. An HR22 has a 1.17 venturi and 1.325 throttle bore. HR181 has a 1.11 venturi and 1.325 throttle bore. HR191 has 1.195 venturi and 1.355 throttle bore. So basicsally this HR22 flows fight in between what an HR181 and a HR191 does. It has been completely taken apart...

Has anyone heard of, used, or have any info on a Tillotson carb model HC12A 2120?.....Thanks, Frank.

All carbs listed below in the first section have just been completely taken apart, cleaned, rebuilt, fulcrum arm set, pop off set, all new stainless allen head bolts/screws, and all come with filter adapter with filled in and blended screw holes. All very nice carbs, ready to bolt on and run...

All carbs listed have just been completely taken apart, cleaned, rebuilt, fulcrum arm set, pop off set, all new stainless allen head bolts/screws, and all come with filter adapter with filled in and blended screw holes. All very nice carbs, ready to bolt on and run. They have had NO fuel through...

Can anyone tell me if there is any rhyme or reason to the tillotson carb numbering? The Walbro (WD-36) I have for my Trisport seems difficult to get parts for. Locating another carb is an option. They also used Tillotsons, 3 possible from paperwork I have, HRM-6A, HD-80A and HR-157A. Is there...

I found these two articles online, one for the HL series and the other for the HR: http://www.tillotson.ie/docs/techinfo_HL_US.pdf http://www.tillotson.ie/docs/techinfo_HR_US.pdf Hope they are useful to someone.

Just got working on my allsport with the jlo 2 stroke motor. It has a Tillotson HL283A carb. Got it soaking as we speak. Also have tank off and soaking to clean rust out...threw a couple of nuts and bolts in there to stir it up. My ???is are there kits available for these or maybe just a...

Got a tilly for $25 shipped on Ebay then shipped it to Korndog, he worked it over for a stock to mild briggs fiver and Cheezy1 sold me an intake. Both very coool dudes and I'd like to give em props for hooking me up. Need a pump and to decide what to use it on but it sure looks pretty on my...

I have 3 of my custom billet fuel caps for all the tillotson carbs, comes with the machined high flow cap, extended screw, and o-ring to keep everything extra sealed. Have only 3!!! $20 shipped each!! Also one more MDB gx200/clone block girdle.Designed to hold that clone or gx200 together at...