transmission

Hello, Im new to the world of motorcycle restorations, and even worse, I've chosen a make and model of a brand that is incredibly rare to find information on. As I wrap up the cosmetics of this bike, I move to the mechanical and find that the high and low gears on the second jackshaft have been...

Hi, I just picked up a mid 60's Model T go Kart made by Crue Cut. It was missing an engine and I have one, however I can't figure out how reverse works. I saw pictures online that show two pulleys on the motor shaft, and I realize the fiber disc runs in the one pulley when you lift up on the...

this was removed running off a dirt bike. only bad spot was the intake manifold was rtv-d originally was going to install on a minibike but have too many projects already. comes with all wiring shown and the controls as well as the front mounting point and the rear mounting tabs off the bike...

I am in the process of building up a project Baja MB165 and am comparing torque converters vs clutch and jackshafts etc.. It seems to me that certainly the variable transmission aspect of the T Converters is very nice to have just as it would be nicer in a car to have multiple speeds...

I have one with a heavy growl in the trans and a 4 speed, manual clutch bike that jumps once you pull away in first gear. If you think you can point me in the right direction, send me a PM so I can explain it in more detail. Thanks for your time, Jerry...

OK so with some searching around I'm finding different answers, what type of oil is recommended for a Kawasaki MT 1 I picked up this summer. I forgot to ask the PO and I saw that Gatecrasher here has posted some good stuff but his link is now dead. 10W30 engine oil?, Bel ray? Honda GN4...

Does anyone know where I can find some info on where the transmission fluid goes or how to check/replace it? I found a 60s-70s model (I think) Coleman 2.4 mini bike with the Sachs Saxonette 47cc 2 speed automatic in my grandmothers garage and got it running again but I'm having a few problems...

I got this about 15 years ago. Just finally picked it up from my parents house and want to get it running good. Can't find any name or markings anywhere on the frame. Has a 2 speed transmission on it. Just looking for the make and year. I haven't ever seen one quite like it. Thanks!

I need a small forward/reverse mechanical transmission. Gear ratio is not an issue. Chain or belt drive.

im looking for a gearbox like the one in this bike, its a warner t-92. does anyone have one to sell? they came in the power king tractors and bready tractors. ps, anyone know what bike its in? I have no idea what it is but I wanna put the tranny in a bearcat. here is a link to the thread...

does anybody know what the side part of the engine is were the clutch would go, and were i can possibly buy bought the 198cc mini chopper since i lived in vegas but they didn't have the side piece

Calling all Saxonette owners. I was changing the transmission fluid in one of my Sachs engines the other day and noticed a metallic swirl. This is from a 47cc Saxonette on an Arctic Cat. I've been around these engines since the late 70's, with a 30 year break in between, but have never gotten...

Saxonette transmission fluid with metallic swirl.

My question is about the transmission on my Broncco T/C-4 and I hope to find some answers from someone who has ridden/drove one of these that has the 4 speed engine. What is it like shifting through the gears? When I put the case back together I was careful to align all the gears, but it...

I'm looking for the 3 springs and 3 ball bearings that go in the large low gear sprocket for the 2 speed transmission. I also need the large spring that goes in the high gear sprocket assembly.

This is a Garelli 50cc 4 speed off a Broncco T/C-4. So here we have a few ponderings. I mainly opened this darling up the fix leaks and to see why it seemed to only be going into neutral, 1st, and 2nd. All the gears looked nice, it just appears that 3rd and 4th were not aligned properly, once...

In the early 70's I bought a used Sears minibike, with a sprung seat. It had a Tecumseh 4HP and the three chain, two clutch, two speed transmission system similar to other minis of the time. It was the only one we ever saw back then. The chains were badly rusted and the overunning bearing...

I found a mustang trail machine for sale. It's not complete but it does have the original three speed gearbox. The clutch is rough and may be unusable. Does any one know what clutch this is and if there is a replacement available ? It had a kickstart and im not 100% sure how the system worked...

Just curious if anyone has ever tried mounting a "pocket bike" transmission to an engine on a minibike to be used in place of a torque converter or jack shaft? Also, I had an idea involving a lawn tractor gearbox. (Doubt it would work, but I had to share). I have "access" (gotta go dig it up...

Anyone have a super bronc transmission for sale? Gracias.