Installing Electric Start on 6.5 Clone Harbor Frieght

#1
Ok I bought a electric start kit off ebay from a seller in Canada , it took almost two weeks to get here so you have to wait a bit , it included a charging coil , Starter , Shroud , wiring , flywheel , starter box , I bought this kit for 80.00 pluss ahipping , I hope to use this engine in my Ruppster project , what didnt come was the nuts bolts and the two dowel pins use to center the starter , I went to my local Honda shop and was able to buy them including a throttle cable clamp ,, Here is where I started with the engine taken down to this
 
#4
Holding bolt part numbers 90015-883-000 2 needed
Starter bolt part numbers 90017-883-000 2 needed
Starter dowel pins part number 94301-08100 2 needed
Cable clamp and screw part numbers 93500-050160A 16576-891-000 1 each
ALL HONDA Part Numbers and still avalible
 
Top