This bike will be a scooter looking like an old Vespa but smaller. Im using 4" wheels from an Arco. The engine is an old 2 stroke Tecumseh I think from a little snowblower. It runs good and seems powerful enough. I filed down the shaft to fit the 5/8" clutch. The old one was small with a big sprocket on a stepped shaft. I have 2 other newer engines like that one but I dont know how well they run and this one looks cooler. The others have a bigger shroud to work with electric start. Im going to use pipe from an old lally column for the frame going up to the neck and work my way back building the rear portion to resemble the shape of a vespa. I have a nice white bicycle seat for it. I cut an old helmet in half thinking I can use it for the side pods so we'll see how that goes. It should be a pretty simple build. The hard part will be the rear portion of the body I think and getting that as Vespa like as I can. Im not going for exact I just want it to look good not weird.