DaddyVox's latest activity
-
DDaddyVox liked RonGdragminis's post in the thread Champion Rocker Cracked intake, Vacuum leak at intake manifold (RTV RED?).Just a tip for later builds or correcting this one. You can always make a shim using common shim stock that comes in roll or get copper...
-
DDaddyVox replied to the thread Front wheel setup vs rear motovox drag style.Came out just how I wanted it. Next up Brad hill style motovox tank, and hydraulic brakes up front. 10” x 2 1/4” rim 90-70-10 tire...
-
-
D35 mm film canister...scroll down...
-
DDaddyVox replied to the thread Front wheel setup vs rear motovox drag style.Mostly cruising in mini bike events around my area (usually big parking lots sectioned off), and occasional 660' at events, but nothing...
-
-
DDaddyVox replied to the thread Front wheel setup vs rear motovox drag style.decided on a 90/70-10 tire which is about 14" in height 3.5" in width rears are 15x6x6 but measure 14.4" in height... 14" height front...
-
DA taller tire should offer less rolling resistance, if everything else is equal.
-
DGot a motovox front suspension kit on the way with a 10” front scooter rim 10”x2 1/4”, and kenda 110/80-10 tire on the way (unsure if I...
-
-
DDaddyVox replied to the thread Block mounted tensioner / spring loaded tensioner / sprocket guard.If anyone is curious the block mounted chain tensioner along with the sprocket guard makes this bulletproof no chain issues anymore
-
-
DDaddyVox replied to the thread Block mounted tensioner / spring loaded tensioner / sprocket guard.Got the sprocket guard on today still waiting for the block mounted tensioner… I think this is going to work
-
-
DDaddyVox liked Strigoi's post in the thread Block mounted tensioner / spring loaded tensioner / sprocket guard.Just make sure that slack is in the loose spot of the chain. All chains have a tight and loose spot.
-
DDaddyVox liked nightgrider's post in the thread motovox mbx10 i need street tires to fit stock wheels any ideas?.The wheels and tires look to be ones from a Chinese scooter. It is a little hard to tell by the pictures due to the perspective, but I'd...
-
DDaddyVox replied to the thread Block mounted tensioner / spring loaded tensioner / sprocket guard.That is good to know appreciate you @Strigoi. Both the OldMiniBikes / RCF tensioners are pretty similar in design. I got about 1/2-3/4" slack in...
-
DDaddyVox liked Strigoi's post in the thread Block mounted tensioner / spring loaded tensioner / sprocket guard.I've used the one linked below before. It worked well and I didn't have any issues. You still need to make sure your chain has the...
-
DWell.......... ummmm.....
-
DDaddyVox posted the thread Block mounted tensioner / spring loaded tensioner / sprocket guard in Mini Bike Discussion.I recently finished my build, and during multiple hard rides with the stock motovox tensioner my chain would come off (happens while...
-
