Recent content by John213

I may have gap the coil off because I dont have the specs for it. I tried to gap it close to the original one. The vales I gaps to .004 as recommended by a small engine mechanic if its wrong please advise. Thank you very much

Thanks for the advice I will work on that today

The oil level is overflowing as you said. I will recheck the kill switch and let you know how it goes. Thanks lot for the help

Thanks for responding. I sprayed starter fluid no change, I replaced the spark plug and th coil. I ran a continuity check on the kill switch wire and everything reads good. I am willing to buy a kill switch but i am not so sure thats it. I will give it a try. Thank you

I also have a Coleman CT 200u-ex that will not start. Following these post I have tried them all with no results. I pull on the starter cord and nothing, she may puff a little smoke but will not crank. I replaced the spart plug, the coil, cleaned out the carburetor, checked all the wiring and...