Currently have a 12.5 pilot I was recommended but I'm guessing it's making it lean out while idling hence the high idle. I have a 95 main, ordered both a 17.5 pilot to see if it brings down the idle and a #130 main jet. Been turning the air screw on the bottom about 1 to 1 1/2 turns out. Have...
if its not a fuel shortage then what would it be? it starts up with the enrichment device on but it has a very high consistent idle, and i cant get it to idle low with it off, is it getting too much air? i dont think its a chinese knockoff, all of the parts are from Iskys website and i got it...
Hey guys im finishing up my go kart build and have it all together, but this thing is almost impossible to start. The valve lash is good, but i dont think its getting enough fuel when pulling the cord or something. I had it running for the first time today for a solid 45 seconds with the...
Thanks for the input guys! Its been pouring rain where im at unfortunately, hopefully itll clear up and ill get a chance to get the beast started. I ordered a 130 main jet for the mikuni because ole told me it may be running too lean with the stock in there. I'll also check my lash about 10...
Hey! I just rebuilt my non-hemi predator 212cc motor after running it for a few months after removing the governor and adding bigger jets/exhaust. I wanted to really build it this time so i cracked open the case and added these parts:
Mod 2 cheater cam
26lb valve springs
Chromoly push rods...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.