band brake

Looking for a Trail Horse 6” Rear Wheel (5 spoke) with both the sprocket and drum for band bake or even just the sprocket and band brake drum mounts

I made this mount for my bike after looking around I did not see any for sale Im going to have 15 made at first to sell I will supply all hardware to bolt it to the engine, all you will need is the brake, brake lever, and cable I can provide the links to those parts The mount will come...

Here is a vintage Trail Horse by General Appliance project mini bike. Rear band brake is intact and seems to work. Has a 5 hp Briggs that has spark but will no doubt need typical fuel system cleaning etc. Seat has tears, clutch is toast and the previous owners answer to the 1 inch handlebars was...

323.702.2120 / Koollee_909@yahoo.com I do not have the spacer, or band, only the hub. 3 hole, fits Azusa wheel, etc. will sell $15 ... good condition or trade for Hub like this with the flange, to mount 6 hole sprockets to. Need one of those (in last pic with blue frame) or a...

Hey forum, I have an ARCO type frame. I installed a clutch band brake (5.5 Intek Briggs), but for some reason, it slides to the side, and it's dangerously useless. I would like to install something very safe because my children ride it. any suggestions? I really don't want to weld...

What size band / clutch brakes are you guys using on a MT clutch? (35 pitch) I measured the drum and it's 4 3/16"... so I'm not sure if I should use a 4 3/16'' or maybe something a little larger so it doesn't rub :shrug: