bind

Someone mentioned that coil bind was the cause of the camshaft failing on my recent Box Stock mud motor build. I noticed the exhaust valve has a lash cap on it. I don't remember seeing on on my old Predator. Could that be contributing to the possible coil bind?

Hi all, new member here. About 2 months ago I got a Baja Warrior from a local Tractor Supply Co to have some backyard fun! I loved the riding style/feel of the Warrior and it did very well in the backyard "tracks" I have tried so far. The stock engine (Honda GX200 clone) almost always started...

Hi guys. I have installed 1.3 rockers along with a .310" lift cam on my animal engine. Total lift is .403". I have the gp960-2 spring kit but the coils bind. Does anyone know what springs I need for this? What brand? Thanks

I am just finishing up my son's engine, pretty basic build... ARC rod and flywheel honda flat top stock head milled .060 (ported. ss valves ect) 26lb springs with locks and retainers 308 dyno cam stock ratio rockers I just finished putting the valve springs, locks and retainers in...

Alright everyone here it goes ,I have A concern issue on my clone. I have the .256 not modified AGK cam, billet retainers, 18pd springs, stainless valves, chrome molly push rods And stock rockers for the moment, because with the 1.2 rockers, and that lift ratio .265 gives me .318 which is...