changing

Hey... I know it can be done but I can't find out how.:no: Joined a long time ago but I'm just starting to get more involved and update accordingly. Doing this as a last resort:out:: couldn't find anything with searches and couldn't email the administrators. Thanks in advance.

Anybody have any good tips on changing mini bike tires , maybe a inexpensive home made machine . I don't really want to buy a harbor freight p o c ,when I probably have enough scrap laying oround the shop to build my own. Just wondering if anybody may have any good tips that may have worked out...

can i change sprockets on a clutch converting a 40/41 to a 35:shrug:

Anyone know how much oil to put in the fork after changing seals?

Yup sad to say buts its been a blast! Any one know a good Jeep or 4x4 forum? One where I may see old friends from here?:wink:

Hey guys I don't know if I'm in the correct section (my MB has 5" wheels) And I want to make the handlebars like this one I found here Is it a cut and weld job or can I just big the forks/handlebars

gave my dusty bikes that have been sitting around doing nothing a bath today, plus I finally changed out the homeade fuel inlet the previous owner made for the dell on the broncco for an NOS one I found for it. So after the bath and repairs I took it for a ride, and was reminded once agian...

Hi there, new guy here! I'm looking for a used motor (75-100) for a mini bike that I'm building. I found a B&S on craigslist but it only has a lever for throttle. Can a buy a new bracket for a twist throttle? If not is there any way I can fabricate one? Thanks...

I got a two tire that I need to put on, but I obivisly tried but failed and got fustrated. How could I put them on with out machines only by hand cause if I get some tool Ill use it once and never use it again and it will take up room. Please help before I explode:censure: lol

Changin oil in a 3.5 and read their should be 1/2 a quart in it I didn't get that much out of it!! What's up with that? Clue me in? I hate still being a new bee! FRANK

I got 13x6.5x6 pocket bike tires and I need some tips/advice to get the stock tires off and get the new ones on... its not a fun thing to do :2guns:

Anybody know how to get the bulb out so a brighter one can b put in?

Thanks to the fine members of OldMiniBikes I have found out that my Tote Gote is really a Side Kick! :shrug: How in the world do I edit the names of the pics I already posted and remove them from the Tote Gote category? What category should they go in?

Right now my kart has the NR racing motor with a candy cane header and RLV muffler on it, to say the least it is loud and I also don't really like how it sticks out way pat the back of the kart Been thinking of changing to a box stock style header with a screw in muffler to cut down on the...

Older streaker,,So we moved back the seat, and are remounting the engine. It will be behind the axle, Not front end lite but def a little liter. We cut out the back engine guard and are going to replace it when we get the motor in. This is a 7HP Industrial Briggs. Thinking of going with a...

How to change out to an 11 tooth front sprocket or replace worn out front sprocket! For Dummies!!!:confused: Remove the 2 or 3 bolts (some have hex head and some phillips) from Clutch /Chain cover and remove cover! Place prybar behind entire clutch. There are large groves on the rear...

I have a 1970 or 71 Speedway. Need to change the drive belt. How does one remove the pulley from the chain-driven shaft so the belt can be removed? Thanks

okay with the clone engine mounted in my DB30, the drain plug is at the front of the engine.... just doing my first oil change after the 20 minute break-in period suggested my many.... man this is a pain in the a$$ with the oil dripping out the front all over the mounting plate!! is there a...

Well, I found a screaming deal on a 6 hp intek. I am gonna sell the snow blower with the flatty 5hp in it. What can be said about these engines ? I see that the fuel tank takes up a huge amount of verticle space on this thing. I am pretty sure it'll have to go before I can use this thing on...