fuel pump

I am restoring a Tote Gote 670 Nova. I need to run a pulse line to power the new pump, and I am wondering the best place to do so on this particular engine. I'm guessing I will need a fuel pump as these bikes came stock with a oldschool mechanical Tecumseh one that ran off the cam, as the...

I installed a fuel pump on my drag motor and I ran pulse side of the pump to the catch can breather ( where the filter would go). Started it up and it seems to be getting too much fuel. Should I tee off valve cover pulse line and put beather filter back on?

Was wondering if anyone had a part number for a fuel pump for a 196cc Honda clone from princess auto, napa, part source or some similar Canadian reseller. Thanks!

-mikuni carb w/ adapter and pulse fitting $60 -fuel pump $15 -Minibike 2 stage header with RLV silencer and bracket $55 -2 stage header with RLV silencer (I had to bend it slightly to fit a minibike, I think it is meant for a kart) $45 -GX160 billet air filter adapter $8 each -2 UNI...

Got a GX200 Clone, has header, GX390 carb, 18LB. springs, air intake. Just added Mikuni fuel pump because engine bogged on bottom end (I figured this was due to poor fuel delivery). Engine runs fine with choke on and rides fine until you slow down to near stop and it just cuts out. I do not...

I have a vintage Kart fuel pump that is driven off of the axle via a camshaft....does anyone know the mfg or era these were used?....this also has a cool cast alloy bracket for?....any help is appreciated.