nylon

Some Minibikes have a nylon bushing sleeve inside the bigger diameter tube for the smaller diameter tube to slide in. A lot do have any bushings. It is just one steel tube sliding in another steel tube. Those are sloppy fits. It is most likely a 7/8" tube inside a 1" tube. Who sells the nylon...

I just got a set of wheels and one seems to have a small crack. I would like to replace it instead of trying to fix it. anyone got a spare wheel half?

Help needed with finding the splined primary clutch nylon bushing for a 1972 motoskeeter 550 mini bike. Anyone know of a source to get this bushing or any ideas on how to make this plastic bushing??? Just picked this complete bike up and need this piece. Also can anyone tell me what the correct...

Nylon bushings that I pulled from a set of pressure washer wheels. Tossed them in draw thinking I would use them for something. Can you use them? 5/8 x 1 1/4. Thinking this is a trade item One mans junk another mans treasure. If you need these reach out.

So the Delta 1 chopper I picked up the other day has some serious slop in the headset/fork/steering tube. a 1/2" bolt fits snug in the fork plates, but has play in the tube. It almost seems like it should have a bushing or sleeve between the bolt and the tube, but there isn't one. Did these...

I was going through a Bonanza parts catalog and there is a Bonanza nylon jacket listed. Anyone have a picture of one ?

Does any body know what the dimension is between the outside of the bearings? I'm about to order a set for my sears runabout, and need to know what bushings I am going to need. The I have 5" of axle to fill. Thanks

I am looking to by two tires for my bonanza like the one pictured. The say 4.00-6 for the size and no other markings but nylon? I know there are a few tires out there that are the same thing but may have carisle the side and that is fine as long as they dont same RUPP lol. I am looking for...

Does anybody have a photo of how you would mount a sproket on the 5" azuzalite nylon wheels? Can I just use longer hardware and spacers to mount the sprocket? I dont really see anywhere online that sells an adapter.. thanks in advance:shrug:

Does anyone know where to find some new ones ? Thanks.......The Keystone Kid !:confused: