Hi Guys, New to the site and looking for help
My Father in law has this cool mini bike
Its a 1976 Princess Auto with a Tecumseh motor. Well it wouldn't run and gas poured out the carb.
So we replaced the condenser and the points and spark plug
I had the carb ultra sonic cleaned and I installed a carb kit and new float. I set the float level with a 11/64 drill bit I believe. Ive had the carb off about 4 times and cant find the problem
So now the thing first up and will idle forever, but when you give it fuel at about half throttle it starts popping and bogging and puffing smoke. It will eventually die if you don't release the throttle. you cant get enough power for the clutch to start.
Any ideas?
My Father in law has this cool mini bike
Its a 1976 Princess Auto with a Tecumseh motor. Well it wouldn't run and gas poured out the carb.
So we replaced the condenser and the points and spark plug
I had the carb ultra sonic cleaned and I installed a carb kit and new float. I set the float level with a 11/64 drill bit I believe. Ive had the carb off about 4 times and cant find the problem
So now the thing first up and will idle forever, but when you give it fuel at about half throttle it starts popping and bogging and puffing smoke. It will eventually die if you don't release the throttle. you cant get enough power for the clutch to start.
Any ideas?
Attachments
-
1.6 MB Views: 34
-
1.8 MB Views: 37
-
1.9 MB Views: 36
-
2.3 MB Views: 37
-
1.4 MB Views: 33