Anyone know what this is? Trying to fix it up and don't know where to start.

[Bergerking123]

 

[Steve73]

You have a Cat mini. Dont know specific model. But those star wheels and the little spring on the steering neck are clues

See the one in the middle. The 300x

 

[Bergerking123]

You have a Cat mini. Dont know specific model. But those star wheels and the little spring on the steering neck are clues
View attachment 262247
See the one in the middle. The 300x

You have a Cat mini. Dont know specific model. But those star wheels and the little spring on the steering neck are clues
View attachment 262247
See the one in the middle. The 300x

You have a Cat mini. Dont know specific model. But those star wheels and the little spring on the steering neck are clues
View attachment 262247
See the one in the middle. The 300x

Got any suggestions for what i should buy? Should I just start fresh and get everything?

 

[Steve73]

I always start with an advert and compare that to what you already have. I'm almost certain you are working with a fox 300x.

Here a thread I did when I got a 400x.
Check it out for ideas.

Welcome to OldMiniBikes and mini community!

 

[Steve73]

Other makes of minis looked like that too so I very well maybe wrong too.

 

[SimpleTom]

Yep, Basically the same as a Cat 300X. But yours is the Cat R3001.

 

[minibikin']

View attachment 262240

Original paint R3001. I wouldn't restore it but that's just me. Degrease, compound and wax the frame, fresh seat and controls. Just need the correct engine!

 

[DaddyJohn]

Yep, Basically the same as a Cat 300X. But yours is the Cat R3001.

Look at how that Briggs sits in his chassis... I didn't realize they were that much taller than the Tecs!