caper cycle clutch?

[golden pinto]

Hi ,I recently purchased a caper cycle with a 2 cycle west bend missing a clutch. does any one make a clutch for a 9/16 shaft??? adapter or whatever. any info would be appreciated. thanks Mick

 

[JTG]

Max Torque will build a clutch for you. You need to email Jim Donovan (owner of Max Torque) for a price. Expect to pay $200-300 in advance for the clutch. You will also need the following information.

Engine: West Bend 820
Application: Minibike
Type of shoe: Dry shoe
Output shaft thread size: (example not correct: RH Thread 3/8"-24)
Configuration: Outboard or Inboard (where you want the teeth)
Output shaft: (example not correct: Tapered shaft/Straight shaft etc.)
Engagement: (example not correct: 3000 rpm)
Chain size: 35 chain
Number of teeth: (example not correct: 10 teeth)
Bushing type: Bronze bushing type
Keyway and keyway size: (example not correct: With a keyway.

Jim’s email: jim@maxtorque.com

 

[manchester1]

Exactly what JTG said.

 

[golden pinto]

thank you! clutch is on its way...