Catch can setup

[Gpro13]

I have a Briggs lo206 and I want to run a catch can it was wondering if any one out there might have some helpful advise and maybe some pics

 

[YOOP]

some guy's at our track have just ran the tube into a pop/water bottle attached to the rear of the seat.just drill a hole for the tube in the cap.or just buy a catch can from a kart shop.not that expensive

 

[YOOP]

go kart catch can | eBay

 

[Gpro13]

I work at a minibike shop and I have a catch can but I'm not sure if I should run the tube to the valve cover and pit an air filter on it

 

[vwfan79]

I ran one on my Briggs, there is a website that sells a billet breather cover and you can get it with 2 breather ports to run a fuel pump or hook to your stock carb. They also have the catch can set up for under $20, lots of good reasonably priced Briggs parts. I can't remember the exact website but just search turk brothers racing it will come up as the first result.

 

[vwfan79]

Disregaurd my post I just saw Briggs and now realize yours is a ohv motor.