Well. I have "upgraded" from #219 chain to 1/2" chain.
It is 1/2x5/16 chain, so I thought all was good... It did not fit the 10t sprocket.
I found out afterwards that this chain has larger diam rollers as #40 chain.
So what I did was milling the teeth of the sprocket with a larger diameter.
Now it fits.
It is 1/2x5/16 chain, so I thought all was good... It did not fit the 10t sprocket.
I found out afterwards that this chain has larger diam rollers as #40 chain.
So what I did was milling the teeth of the sprocket with a larger diameter.
Now it fits.