DRIFT trike project

[minipex]

the axle is 36 inches with 2 inches of thread on each end. it is a 1 inch axle. the wheels are 5x5 dwt american bolt pattern 1/4 studs. $34 each on ebay. the tires are dunlop 11x6x5. $60 for 2 on ebay. 11 inches is as tall as you can go for the pvc sleeves. they fit nice and tight

 

[minipex]

the axle is 36 inches with 2 inches of thread on each end. it is a 1 inch axle. the wheels are 5x5 dwt american bolt pattern 1/4 studs. $34 each on ebay. the tires are dunlop 11x6x5. $60 for 2 on ebay. 11 inches is as tall as you can go for the pvc sleeves. they fit nice and tight
View attachment 68273 View attachment 68274

 

[Street Smart]

I`m sure it`s a BLAST!!!!!

 

[Moedog07]

the axle is 36 inches with 2 inches of thread on each end. it is a 1 inch axle. the wheels are 5x5 dwt american bolt pattern 1/4 studs. $34 each on ebay. the tires are dunlop 11x6x5. $60 for 2 on ebay. 11 inches is as tall as you can go for the pvc sleeves. they fit nice and tight

If you had to build another one would you change anything? Like the axle width or or gear ratio?

 

[minipex]

https://www.youtube.com/watch?v=NHbEq35ePco&feature=youtu.be

TPEX DRIFT TRIKE - YouTube

the sprocket is a 53 tooth 2 piece and works great. the width seems good to. i've spun pretty good and there is no feel of the trike going over at all

 

[Moedog07]

Gathering supplies now to build one, as if my neighbors don't hate me enough.

That thing is Awesome! Can't wait to start on mine!

 

[bikebudy]