Forks

Not so mini bike

Not so mini bike

#1
#1
I am currently trying to get this stellar mark 2 up and going. Hit a road block with the forks. The uppers are bent. Pretty bad. I tried swapping in a bronco uppers but there is play in the lowers where they slid in. I'm looking for a set like these. Any help would be great. My springs and lowers have really good chrome on them so I want to reuse.


Any help would be greatly appreciated.
 
Not so mini bike

Not so mini bike

#3
#3
Yes. The spacing on mine is 5" between fork plates and tubes are 1" od and 7/8" id. He top of mine has tubes welded like the lil Indian sabre for cold down handle bars but it dosent need to be I would rather not I want to mount some rupp handle bars or something similar to it.
 
capguncowboy

capguncowboy

Well-Known Member
#4
#4
Is that picture of 70 Rupp uppers? Are they the same as Stellar? if you need some measurements of the Rupp uppers, let me know. I've got mine apart already
 
capguncowboy

capguncowboy

Well-Known Member
#6
#6
OD is 1.25"

ID is 1", BUT!!! If the fork uppers have the plastic sleeve bushings in them, they're made to use with a 7/8" fork lower. You can pick up the bushings in BWMS

Distances between triple tree plates is 5.39"

Distance between fork tubes is 4.71"
 
Last edited:
You must log in or register to reply here.
Top