Gapping Flywheel

[bandit 40]

Hello, Everyone, After Lapping The ARC Billet Flywheel To The OEM Honda Crankshaft, And Installing It On My Gx200 Clone, With Of Course Billet Rod , I Cant Find Anywhere That Says What The Gap Is Between The Coil And Flywheel. Does Anyone Know, What Did You Gap Yours At ?:doah: Thanks Bandit...............

 

[Strigoi]

check AGK under the "performance basics" section. go through there and there's a thing on doing the aluminum flywheel. they say to gap it at 0.020".

 

[mnibike]

check AGK under the "performance basics" section. go through there and there's a thing on doing the aluminum flywheel. they say to gap it at 0.020".

Affordable Go Karts - install aluminum flywheel & advance timing

 

[Stang]

If you don't have a feeler gauge a lot of people use a business card. Also, the AGK site specifies the gap for the stock flywheel. I would just call ARC to get their recommendation. The ARC flywheel has a stronger magnet and they may gap theirs differently for safety or whatever reason.

 

[bandit 40]

Thanks All Of You For Your Feedback, I Will Do That.:thumbsup::thumbsup: