InjunTom's buildoff Bonanza

[INJUNTOM]

It's an MX1410 - I like it because you never see them. I have a new set of tires and repro wheels. Most likely it will have a pumped 5hp Briggs flathead...But you never know.

 

[INJUNTOM]

If I go the Briggs route then these are the parts I'll use in the engine:

 

[INJUNTOM]

....And if there's room without having to remove the factory jackshaft mounts, then I'll use a Torq-averter.

 

[kbs8ball]

Hey that looks kinda like my pile of parts:gunsmilie:

 

[INJUNTOM]

Hey that looks kinda like my pile of parts:gunsmilie:

Oh! you have a yellow Taco too?

 

[kbs8ball]

Oh! you have a yellow Taco too?

AHHHH maybe someday...........

 

[OldMan]

That should make a nice ride, once it's done.

 

[offroadwhatever8]

That Cam will make that 5 hp scream thats for shore. Nice build :thumbsup:

 

[INJUNTOM]

That Cam will make that 5 hp scream thats for shore. Nice build :thumbsup:

The cam is supposed to bump a 5hp Briggs up to 8.5hp at 4800rpm. I wind the stock 5hp on my BC1000 to 7000rpm, so getting a big boost at 4800 should really feel good right in the middle of the powerband.

 

[Jleon]

Gonna be sweet! I have an old 5hp B/S. Maybe it's time I do my first engine build. You guy's are a bad influence!

 

[INJUNTOM]

Scored a gas tank today

 

[GTO]

I was wondering what the hell you were doing :doah: weren't you looking for that front wheel too?

 

[INJUNTOM]

Now I'll have to find another tank. I'll part this bike, and put the tank on this MX1410 project.

The forks I'll put on my late style BC1200 to convert it to what this bike was, and maybe put on a Hodaka engine.

Thinking of Using the swingarm on the small tube BC1100 I have to convert it to an MX style frame.

My buddy Vince wants the bare frame for a Hodaka engine he has.

I'll probably take his early style front peg frame and build a BC1000 out of it.

Wasn't really needing the wheel in particular, but with all the projects I have, I can use all the new tires, wheels, shocks, jackshafts, etc. I can get.

Overall this will improve about 6 bikes.

 

[INJUNTOM]

BTW, The wheels you are thinking of are Sensation wheels. I need them in both 5" and 6" sizes.