I got a Massimo MB200 with a 196cc, ordered a stage 1 to install on it. Header, timing key and jet change were swapped and I had no issues. I wanted to check some tutorials for the lash settings prior to spring install but couldnt find anything solid. So it was the last thing and its been a hassle.
Installed 18lb springs - tried I/E at 003 and 004 but it was a hard pull, found somewhere to set at I 006 E 008 and I was able to pull the cord.
The issue is it pops really loud now, I see smoke out the carb air filter and smell gas. I emptied the bowl and that go me no where. Currently Im unsure what to do besides put the stock springs back in - anyone shed some light maybe?
Installed 18lb springs - tried I/E at 003 and 004 but it was a hard pull, found somewhere to set at I 006 E 008 and I was able to pull the cord.
The issue is it pops really loud now, I see smoke out the carb air filter and smell gas. I emptied the bowl and that go me no where. Currently Im unsure what to do besides put the stock springs back in - anyone shed some light maybe?