Hey guys, my 5.5hp clone is running wayyyy too lean. It only idles with the choke on 75% of the time and it only revs with the choke 50% on (but then dies when the rpms get too low). What is the stock jetting size on the 5.5 carbs, like a 75 jet or somethin? I think it needs a good 10% flow increase to the jet to even run right. What would be my next step, I want to drill slow and work up to a bigger size if needed. What size should I do first, like a 78?
Re-jetting needed BADLY!
- Thread starter cxbra
- Start date
- Tags badly! needed re-jetting
