Hello, Looking for vent filters and colored tubing for the fuel tank vent and the valve cover vent on a predator 212. I picked up this 5/16 push in type filter, was hoping to connect both vents to this filter by using a plastic or metal T. The stock fuel tank vent hose appears to be about 1/4" and the stock valve cover vent hose appears to be about 1/2". The push in filter would work on the valve cover with the use of a clamp but too large for the fuel tank. Wondering if I can find a T to connect vents to filter. I guess I could always buy a second 5/16 push in filter, might make it easier. Would like to use red fuel line or tubing. Suggestions of places I might find these things or different ideas for venting welcomed. Thank You.
Attachments
-
376.6 KB Views: 14
-
452.2 KB Views: 14