coil

I have a gx200 motor with arc rod and flywheel with a bored 2.756 wiseco piston. Big valves and a 28mm mikuni. Question cant get it to rev past 4200 rpm is it the stock coil making it not rev, if so what do I need. And I do have duel springs. Thanks

Here is an abstract question noone has asked yet.. How many volts does the coil supply? I know it carries voltage cause when i checked spark on the stock plug it will sure shock a person if you are too close between spark gaps. And that was about a 1 and a half inch spark gap.and since a...

I am looking for a link or info on where to get a reasonably priced new clone style or predator motor with a large enough system to power an old headlight and maybe a tail light. Under $200 would be ideal but.... I would prefer something new and ready to go. I am having a hard time wanting...

Pops with starter fluid. Looks like it's in good shape. Came off of an artic cat sss II Black shroud gray block. Looks like there black under the gray. Still has the muffler sticker on the shroud. Not sure if the lighting system works or not. $325 plus shipping. Or can bring to windber.

Wire needs to be repaired. $80 plus shipping or can bring to windber. If you want the shroud you can have it.

Looking for a nice set of coil springs for Sebac 12 shocks.

Looking for a nice set of coil springs for a set of Sebac 12 inch shocks.

Will a HS 40 lighting coil and flywheel work on a H 35 ?

Will the lighting coil and flywheel from a HS 40 work on a HS 50 ?

I recently acquired this motor. Haven't ran it, but was told it ran good when it was removed from the minibike. Tag was removed many, many years ago. But they knew it was a 5hp. Has great compression and spark. No muffler. Missing some of the linkage parts. Will have this in Ann Arbor...

Rupp Roadster 2 restoration. HS40 Lighting Coil restored and functional.

The condenser in my HS40 us badly rusted so I wanted to replace it. Visually, it appears that a number 29177 may be correct, but I also have a similar condenser that is about two-thirds the length of the original or the 29177. Two questions: 1) which condenser is correct? 2) does the...

looking to light up a 5hp for a small 3 wheeler I'm building for our Granddaughter, I thought some lights would be cool on it..

All, I have a Tecumseh Power Sport 6 hp OHH60 spec 71209E engine. I would like to add a lighting coil to this engine so that I can add a headlight to a mini bike. Will a OHH60 flywheel and lighting coil set up off a snow blower work. Thanks in advance! Hec

NOS, I think it's the type used on big-blocks, but would fit small blocks as well. Has funky connectors but could be rewired with a standard mini bike connector. $50 shipped vis USPS from 37618

Wtb your 3 hp points coil you may have sittin around,, we have lots of engines but no points coil,,

Does anyone know the part number for a Briggs raptor ignition coil.

Is there a performance coil out there under $100

Here is a lighting coil and flywheel for a tecumseh H50-h70 Looks to be in good shape.This has the 2 coils in it. I never tested it but I dont see why it wont work due to the nice condition $100 plus shipping

I have a HS40 lighted coil and matching flywheel . This is the original flywheel and coil off the HS40 that came on my Powell challenger. Price 135.00 OBO