coil

I'm looking for the coil adapter to run a 3hp flywheel on a 5hp Briggs. If anyone has one they would like to sell, or know where I can get one please let me know. Thanks for the help Vic

Well this past summer I picked up a VT-5 with a brigs on it,the bike was cut up to fit the brigs in it with the original jackshaft still in it,frame was cut at the rear uprights and streched 3 1/2"s. no pics of the mess that it was but it was a mess. I managed to get the frame closer to original...

Background: I got the motor running, but cycled the kill switch a bunch of times to keep it from overspeeding while attempting to adjust idle down. Engine died, wouldn't restart, no spark. I assumed I'd fried the coil by cycling kill switch. (No points/condensor) Ordered replacement coil...

Hi , I am looking to find a lighting coil to fit my 7 hp (208 cc) honda clone engine, and I just cant find any. Looked on eBay without success etc. Can anyone tell me if they exist and where they can be purchased ? Thnaks !

Located in Brewster, NY. Off almost new engine. $15

I have a new 3hp alum flywheel and coil bracket to adapt to a 5hp briggs... if your not going with a billet this is the one you want to use... same as kart racers used for years.. I had it mounted but that was it.. $35 plus ship

Does anywhere sell a lighting coil for a gx200 :shrug::shrug: im running my light just off a battery now on my baja db30.

How do I clean this lighting coil up without damaging anything? Any advice would be much appreciated.

Charging coil wiring info

I picked this motor up today just on a wim. I was actualy looking for a flywheel shroud. Not sure but does this have a lighting coil? If so will it work on a H70?

Hello all, i have a friend who makes off road lawnmowers and he told me that you can run lights off the points and condensr ignition coil. i still dont know exactly what he means and i cant ask him since hes away at college. so if theres anyone who has heard of this thanks. EDIT: i have a 5hp...

need tips and info on installing the lighted parts on my new motor. ive never done this before so is it easy enough to do on your own or better off taking to get it done? also where are the wires i need to run out so i can add the plug for the headlight etc...also is is possible to not run the...

Hi guys, Im trying to get my lighting coil working on my HS40. For some reason when I put a meter on the wire from the coil I get no reading. I pulled the fly wheel off and I have a yellow wire from the lighting coil side going up to a screw that other wires are also screwed to. This is all...

If you have an old style mini bike HS40 non lighted and are looking go lighted heres what I have. Lighted coil and flywheel off a 1971 Rupp Roadster HS40. I would like to have a spare non lighted coil/flywheel so I don't have to break up one of my other motors for an HS50 conversion motor I...

Must buddy has a tecumseh of a riding lower he said its a vertical shaft. If I take the light coil set up off of his motor and find a motor for my ram is it as simple as that or does it need to be a specific motor etc

want to buy briggs intek 6.5 hp stock carb and coil

We need a good coil assembly for Tec H60. #'s on engine are H60 75379K 7077D The engine came off Ariens rototiller. It ran good when we brought it home on the stand, de-greased, power washed, and painted it and now no spark! We checked the points, but if I can find the whole assembly, there...

I have on old briggs 8b and im not a fan of the points and condenser setup it has, so i want to replace the old 4-post coil and points with a newer 2-post magnetron coil. I read on another thread that the coil will bolt right up, but the only thing i couldn't find was would i have to swap...

i have an ohh60 that when i got it it was taken apart and im wondering if anyone could point me to or knows where the 3 different wires(aside from the plug wire) that come from the coil are supposed to connect thanks guys:thumbsup:

I am facing heath issues,and will be selling some projects for the space and the simple fact that i will never get to them. This motor is one of the things for grabs! This was on a speedway blue angel,14 inch wheels.No carb or exhaust,unknown condition.Spins good with compresion.I would...